[Therion] join command

[Martin Sluka]

On 11.3.2009, at 18:57, Boldt, Markus wrote:

> I have a survey on a level of about 500m given in one scrap.  
> Another scrap (in the same File) contains a short passage with  
> about 550m. The two scraps are connected at one station point. But  
> Therion writes a map so that the higher "level" is below the lower.  
> What is wrong?

If you define the map you should write scraps in order from top to  
bottom (if they one above other). And if they are overlaped you  
should use "break". There are several other ways how to define what  
is up and what is down - check the conference.

m.