[Therion] Therion Digest, Vol 112, Issue 5
Robert Countess
rob.countess at gmail.com
Fri Apr 24 06:56:04 CEST 2015
Thanks I’ll check them out.
On Apr 23, 2015, at 1:46 PM, Andrew Atkinson <andrew at wotcc.org.uk> wrote:
> try
>
> http://cave-registry.org.uk/
>
> loads to look at there, although not all of them are Therion.
>
> The one that I work mainly on
>
> http://www.cave-registry.org.uk/svn/CheddarCatchment/
>
> Meets your 4 point below, don't think that there is any data that has
> come out of Walls or Onstation. Some of it has come from compass, for
> which I wrote a script, but it was quick and dirty, probably not much
> use to others.
>
> Gough's and Reservoir have lots of different outputs from the same data,
> with overlaps. For the output without the full understanding of Therion,
> can be found here
>
> http://www.ubss.org.uk/cave_survey_archive.php#Cheddar
>
> For a couple of slightly easier datasets, without the fancy outputs
> (yet) there are
>
> http://www.cave-registry.org.uk/svn/WookeyCatchment/
>
> http://cave-registry.org.uk/svn/Burrington/
>
> All three are been actively worked on and with an SVN client you could
> even replay how they have been built up. I do not, however, follow the
> recommended way to arrange data, I have arranged it so every folder
> should be stand alone, I find that it has the advantage that people
> without the full understanding of Therion can work on the bits that they
> are interested in, probably has some disadvantages to putting the whole
> thing together, but I cannot say I have found it a problem
>
> Andrew
>
> On 23/04/15 20:57, Rob Countess wrote:
>> Does anyone mind sending me one of your data sets. It would help me
>> understand the structure and organization.
>> I have data for several cave areas on Vancouver Island BC Canada in
>> Walls and On Station. I want to convert the whole mess.
>> My data sets are
>>
>> Glory 'ole/Arch Cave area
>> -18 km in 4 main caves and a dozen or so smaller caves linked by
>> overland survey and GPS
>> - longest caves are Arch (10.6 km km 3 entrances), Glory 'ole (2.7
>> km) Pellucidar (1.9 km) Resonance (1.8 km)
>> - Arch cave is divided into several series based on streams and
>> distinct areas of the cave
>> - 3 caves (Glory 'ole, Resonance, and Arch) overlap in plan view (I
>> want to produce a high level map with all three caves in different
>> colours, initially just line plots but eventually real maps)
>>
>> White Ridge
>> -7 km in 3 main caves and a half dozen smaller caves Linked by radio
>> location and GPS
>>
>> Larch Mountain
>>
>> 2 km in 3 main caves and a dozen smaller caves linked by GPS
>>
>> I also have a friend that manages data for Weymer Creek (over 30 km in
>> over 100 caves, longest are 12 and 9 km lots of caves overlap in plan
>> view). I am trying to convince him to switch to Therion too.
>>
>> I am looking for an example data set that has
>>
>> 1) multiple caves in one caving area
>> 2) at least one cave large enough to be broken into series
>> 3) overlapping layers in at least one of the caves
>> 4) examples of files to produces different outputs with overlapping
>> caves or cave series in different colours on the same map.
>>
>> Thanks,
>>
>> Rob Countess
>>
>> PS If you don't want to spam the mailing list then send to:
>> rob.countess at gmail.com <mailto:rob.countess at gmail.com>
>>
>>
>> On Wed, Apr 22, 2015 at 6:35 PM, Xavier Pennec <Xavier.Pennec at inria.fr
>> <mailto:Xavier.Pennec at inria.fr>> wrote:
>>
>> if all stations have different name in Compass and Walls, could they
>> be put in a single survey name-space?
>> However, I agree that this is not the cleanest way as it is not
>> respecting the structure of surveys that was previously defined.
>>
>> Xavier
>>
>> Le 22/04/2015 13:31, Martin Sluka a écrit :
>>
>> The problem of Compass and Walls data conversion is generate
>> list of equate commands. In Compass and Walls it is simple,
>> because there couldn’t be two stations with identical name. But
>> in Therion it is not a rule. So you should to do it manually.
>>
>> in survey12 which is above survey1 and survey2:
>>
>> equal a101 at survey1 a101 at survey2
>>
>> m.s.
>>
>>
>> 19. 4. 2015 v 10:20, Robert Countess <rob.countess at gmail.com
>> <mailto:rob.countess at gmail.com>>:
>>
>> <Glory.zip>
>>
>> This is from the Glory ‘ole caving area on Vancouver Island.
>> I surveyed there from 1996 to 2007 in Arch Cave (10.5 km)
>> Glory ‘ole (now 2.8 km) and Resonance (now 1.8 km). The area
>> had been previously explored from 1980-1988 and some maps
>> produced by hand. Much of the original data was lost. I
>> resurveyed a few km in Arch cave and added 5 km but never
>> completed a map due to the fact that loop closures were
>> wreaking havoc with my walls and Illustrator attempts at a
>> map. The original data in Arch was sketchy solo topofil
>> survey. Resonance was extended by about 1km and an map
>> produced but recently another half kilometre of passage has
>> been added. Glory ‘ole was increased by about a kilometre
>> but the main passage original survey 1.3 km needed to be
>> resurveyed which led to no map. There are drafting leads in
>> connection areas between the three caves. Two other caves
>> Pellucidar and Tsulton Rising (cave dive) were managed by
>> Pat Shaw, a cave diver.
>>
>> I went off to medical school in 2007 and nobody picked up
>> the torch as far as drawing maps. Now I’m back and we are at
>> it again. I want Therion to keep the maps up to date with
>> the exploration going forward.
>>
>> The data is from 2004. I lost my 2007 copy due to 7 years of
>> neglect and hard drive failure. I still have original notes
>> of all exploration I was involved in but there are probably
>> 3 km of passage that should be resurveyed.
>>
>> I’m getting the hang of Therion and have got Resonance and
>> Glory ‘ole centerline data converted over.
>>
>>
>>
>>
>> On Apr 19, 2015, at 12:54 AM, Martin Sluka
>> <martinsluka at mac.com <mailto:martinsluka at mac.com>> wrote:
>>
>> Robert, may you send me an example of Walls data?
>>
>> I was surprised how simple is to convert Compass data to
>> Therion. As I may say, Compass data are small subset of
>> Therion’s format so several simple copy/paste made the job.
>>
>> m.s.
>>
>>
>> 19. 4. 2015 v 6:41, Robert Countess
>> <rob.countess at gmail.com
>> <mailto:rob.countess at gmail.com>>:
>>
>> Thanks for the help.
>>
>> Generated my first pdf plan and profile with
>> UTM/elevation and xvi file for drawing map. I love
>> how automatic many of these things are. I am feeling
>> hopeful about Therion now. I am stoked to finally
>> finish the maps of Arch, Resonance, and Glory ‘ole
>> and hopefully later this summer we will connect them
>> all to make it at least Canada’s second longest
>> Cave. If I get this working, I’m sure I can convince
>> some other Canadian cavers to use Therion. Then
>> again I can’t even get them to use Walls. Many are
>> still using On Station. I think the speed and
>> flexibility of output with win them over.
>>
>> One tiny annoyance. One of the surveyors last names
>> is von Vorkampff and Therion gives and “invalid name
>> format” error message. I changed it to von_Vorkampff
>> and bypassed the error but with sub par final map
>> output - it says von.Vorkampff
>>
>> Again, thanks for helping me out. I’m sure I’ll have
>> more questions later.
>>
>> Rob Countess
>>
>> On Apr 18, 2015, at 2:49 PM,
>> therion-request at speleo.sk
>> <mailto:therion-request at speleo.sk> wrote:
>>
>> Send Therion mailing list submissions to
>> therion at speleo.sk <mailto:therion at speleo.sk>
>>
>> To subscribe or unsubscribe via the World Wide
>> Web, visit
>>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>> or, via email, send a message with subject or
>> body 'help' to
>> therion-request at speleo.sk
>> <mailto:therion-request at speleo.sk>
>>
>> You can reach the person managing the list at
>> therion-owner at speleo.sk
>> <mailto:therion-owner at speleo.sk>
>>
>> When replying, please edit your Subject line so
>> it is more specific
>> than "Re: Contents of Therion digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: having trouble, first time user (Wookey)
>> 2. Re: Therion Digest, Vol 112, Issue 4, having
>> trouble, first
>> time user (Robert Countess) (Dave Clucas)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sat, 18 Apr 2015 23:07:26 +0100
>> From: Wookey <wookey at wookware.org
>> <mailto:wookey at wookware.org>>
>> Subject: Re: [Therion] having trouble, first
>> time user
>> To: therion at speleo.sk <mailto:therion at speleo.sk>
>> Message-ID: <20150418220726.GF8982 at halon.org.uk
>> <mailto:20150418220726.GF8982 at halon.org.uk>>
>> Content-Type: text/plain; charset=utf-8
>>
>> +++ Robert Countess [2015-04-18 12:25 -0700]:
>>
>> Im using Mac OSX10.9. followed MacOSX
>> installation instructions on wiki
>>
>> Roberts-MacBook-Pro:~ Rob$ ruby -e "$(curl
>> -fsSL https://
>> raw.githubusercontent.com/Homebrew/install/master/install
>> <http://raw.githubusercontent.com/Homebrew/install/master/install>)"
>>
>> [lots of dependency/package building]
>>
>> ? /usr/local/Cellar/therion/5.3.16: 6
>> files, 4.4M, built in 50 seconds
>> Roberts-MacBook-Pro:~ Rob$ xtherionxtherion
>> -bash: xtherionxtherion: command not found
>> Roberts-MacBook-Pro:~ Rob$ xtherion
>>
>> This is exactly the reason that 20 years ago
>> binary linux
>> distributions were invented, to replace the
>> previous painful process
>> of users downloading code and tools and
>> dependencies and building
>> them all until they got some software working.
>> 'brew' attempts to
>> automate this process but there are still a lot
>> of ways it can go
>> wrong.
>>
>> Do Mac people not have a proper packaging system
>> someone could make
>> therion packages for?
>>
>> _____________________________________________________
>>
>> A program named WISH opened and window named
>> therion compiler. The Status bar
>> at the bottom read ?User interface is not
>> active. To activate it open and
>> existing file or create a new one."
>> When I try to open a file with either the
>> Wish file|open or the folder button
>> I am unable to open any files in the Demo
>> data set - they are all grey and
>> cannot be selected.
>>
>> I am a first time user. Previously used On
>> Station and the Walls. I had data
>> for 3 major caving areas in Walls totalling
>> about 50 km of cave. I want to
>> switch it all to Therion but if I can?t get
>> the program to work then I?ll have
>> to stick with Walls.
>>
>> I'm sure we can get you going. We do have
>> several mac users here, but
>> I'm not one so can't really provide much help.
>>
>> Can you get a command prompt? Can you run
>> 'xtherion' from there?
>> That's the user interface for drawing stuff up.
>>
>> 'therion' is the compiler tool that processes
>> the data. What happens
>> if you run 'therion -v version'? Does that print
>> out a version? or
>> 'therion --print-init-file'?
>>
>> If you can convert some of your (centreline)
>> data (just using a text
>> editor) you should be able process it using just
>> 'therion'.
>>
>> You will need xtherion in order to draw up cave
>> sections.
>>
>> Has anyone written a walls to therion conversion
>> tool? I'm not aware of
>> one.
>>
>> Wookey
>> --
>> Principal hats: Linaro, Debian, Wookware, ARM
>> http://wookware.org/
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Sat, 18 Apr 2015 22:18:41 +0100
>> From: Dave Clucas <dave.clucas at icloud.com
>> <mailto:dave.clucas at icloud.com>>
>> Subject: Re: [Therion] Therion Digest, Vol 112,
>> Issue 4, having
>> trouble, first time user (Robert Countess)
>> To: therion at speleo.sk <mailto:therion at speleo.sk>
>> Message-ID:
>> <2A55A0EF-15F8-414A-B2CB-0EA18192A198 at icloud.com
>> <mailto:2A55A0EF-15F8-414A-B2CB-0EA18192A198 at icloud.com>>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> To open an existing file start Terminal and type
>> xtherion followed by the filename you wish to
>> open. You may drag the filename from a Finder
>> window.
>>
>> Dave Clucas
>> daveclucas.com <http://daveclucas.com>
>> <http://daveclucas.com/>
>> sarawak-caves.com <http://sarawak-caves.com>
>> <http://sarawak-caves.com/>
>> dave.clucas at icloud.com
>> <mailto:dave.clucas at icloud.com>
>> <mailto:daveclucas at icloud.com
>> <mailto:daveclucas at icloud.com>>
>>
>> Exploring the World - One cave at a time
>>
>>
>> On 18 Apr 2015, at 21:17,
>> therion-request at speleo.sk
>> <mailto:therion-request at speleo.sk> wrote:
>>
>> Send Therion mailing list submissions to
>> therion at speleo.sk
>> <mailto:therion at speleo.sk>
>>
>> To subscribe or unsubscribe via the World
>> Wide Web, visit
>>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>> or, via email, send a message with subject
>> or body 'help' to
>> therion-request at speleo.sk
>> <mailto:therion-request at speleo.sk>
>>
>> You can reach the person managing the list at
>> therion-owner at speleo.sk
>> <mailto:therion-owner at speleo.sk>
>>
>> When replying, please edit your Subject line
>> so it is more specific
>> than "Re: Contents of Therion digest..."
>>
>>
>> Today's Topics:
>>
>> 1. having trouble, first time user (Robert
>> Countess)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sat, 18 Apr 2015 12:25:37 -0700
>> From: Robert Countess
>> <rob.countess at gmail.com
>> <mailto:rob.countess at gmail.com>>
>> Subject: [Therion] having trouble, first
>> time user
>> To: therion at speleo.sk <mailto:therion at speleo.sk>
>> Message-ID:
>> <3EF75C43-2B28-4525-A08F-FBD57383F1AF at gmail.com
>> <mailto:3EF75C43-2B28-4525-A08F-FBD57383F1AF at gmail.com>>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Im using Mac OSX10.9. followed MacOSX
>> installation instructions on wiki
>>
>> Installed Mactex
>> rebooted
>>
>> Last login: Fri Apr 17 12:19:12 on console
>> Roberts-MacBook-Pro:~ Rob$ make
>> xcode-select: note: no developer tools were
>> found at '/Applications/Xcode.app',
>> requesting install. Choose an option in the
>> dialog to download the command line
>> developer tools.
>> Roberts-MacBook-Pro:~ Rob$
>> [Restored]
>> Last login: Sat Apr 18 09:14:48 on console
>> Roberts-MacBook-Pro:~ Rob$
>> [Restored]
>> Roberts-MacBook-Pro:~ Rob$ ruby -e "$(curl
>> -fsSL
>> https://raw.githubusercontent.com/Homebrew/install/master/install)"
>> ==> This script will install:
>> /usr/local/bin/brew
>> /usr/local/Library/...
>> /usr/local/share/man/man1/brew.1
>> ==> The following directories will be made
>> group writable:
>> /usr/local/.
>> /usr/local/bin
>> /usr/local/share
>> /usr/local/share/man
>> /usr/local/share/man/man1
>> ==> The following directories will have
>> their group set to admin:
>> /usr/local/.
>> /usr/local/bin
>> /usr/local/share
>> /usr/local/share/man
>> /usr/local/share/man/man1
>>
>> Press RETURN to continue or any other key to
>> abort
>> ==> /usr/bin/sudo /bin/chmod g+rwx
>> /usr/local/. /usr/local/bin /usr/local/share
>> /usr/local/share/man /usr/local/share/man/man1
>>
>> WARNING: Improper use of the sudo command
>> could lead to data loss
>> or the deletion of important system files.
>> Please double-check your
>> typing when using sudo. Type "man sudo" for
>> more information.
>>
>> To proceed, enter your password, or type
>> Ctrl-C to abort.
>>
>> Password:
>> ==> /usr/bin/sudo /usr/bin/chgrp admin
>> /usr/local/. /usr/local/bin /usr/local/share
>> /usr/local/share/man /usr/local/share/man/man1
>> ==> /usr/bin/sudo /bin/mkdir
>> /Library/Caches/Homebrew
>> ==> /usr/bin/sudo /bin/chmod g+rwx
>> /Library/Caches/Homebrew
>> ==> Downloading and installing Homebrew...
>> remote: Counting objects: 3533, done.
>> remote: Compressing objects: 100%
>> (3387/3387), done.
>> remote: Total 3533 (delta 34), reused 1514
>> (delta 18), pack-reused 0
>> Receiving objects: 100% (3533/3533), 2.65
>> MiB | 1.55 MiB/s, done.
>> Resolving deltas: 100% (34/34), done.
>> From https://github.com/Homebrew/homebrew
>> * [new branch] master -> origin/master
>> HEAD is now at 681c6f3 txt2tags: modernize
>> and add test
>> ==> Installation successful!
>> ==> Next steps
>> Run `brew help` to get started
>> Roberts-MacBook-Pro:~ Rob$ brew help
>> Example usage:
>> brew [info | home | options ] [FORMULA...]
>> brew install FORMULA...
>> brew uninstall FORMULA...
>> brew search [foo]
>> brew list [FORMULA...]
>> brew update
>> brew upgrade [FORMULA...]
>> brew pin/unpin [FORMULA...]
>>
>> Troubleshooting:
>> brew doctor
>> brew install -vd FORMULA
>> brew [--env | config]
>>
>> Brewing:
>> brew create [URL [--no-fetch]]
>> brew edit [FORMULA...]
>> open
>> https://github.com/Homebrew/homebrew/blob/master/share/doc/homebrew/Formula-Cookbook.md
>>
>> Further help:
>> man brew
>> brew home
>> Roberts-MacBook-Pro:~ Rob$ brew update
>> Already up-to-date.
>> Roberts-MacBook-Pro:~ Rob$ brew doctor
>> Please note that these warnings are just
>> used to help the Homebrew maintainers
>> with debugging if you file an issue. If
>> everything you use Homebrew for is
>> working fine: please don't worry and just
>> ignore them. Thanks!
>>
>> Warning: Some directories in
>> /usr/local/share/man aren't writable.
>> This can happen if you "sudo make install"
>> software that isn't managed
>> by Homebrew. If a brew tries to add locale
>> information to one of these
>> directories, then the install will fail
>> during the link step.
>> You should probably `chown` them:
>>
>> /usr/local/share/man/de
>> /usr/local/share/man/de/man1
>> Roberts-MacBook-Pro:~ Rob$ brew tap
>> homebrew/science
>> ==> Tapping Homebrew/science
>> Cloning into
>> '/usr/local/Library/Taps/homebrew/homebrew-science'...
>> remote: Counting objects: 10005, done.
>> remote: Compressing objects: 100% (15/15), done.
>> remote: Total 10005 (delta 5), reused 0
>> (delta 0), pack-reused 9990
>> Receiving objects: 100% (10005/10005), 2.68
>> MiB | 1.56 MiB/s, done.
>> Resolving deltas: 100% (5584/5584), done.
>> Checking connectivity... done.
>> Tapped 475 formulae (501 files, 5.1M)
>> Roberts-MacBook-Pro:~ Rob$ brew install
>> https://raw.githubusercontent.com/un1x86/homebrew-science/therion/therion.rb
>> ########################################################################
>> 100.0%
>> ==> Installing dependencies for therion:
>> libpng, freetype, xz, libtool, j
>> ==> Installing therion dependency: libpng
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/libpng-1.6.17.mavericks.bot
>> ########################################################################
>> 100.0%
>> ==> Pouring
>> libpng-1.6.17.mavericks.bottle.tar.gz
>> ? /usr/local/Cellar/libpng/1.6.17: 17
>> files, 1.3M
>> ==> Installing therion dependency: freetype
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/freetype-2.5.5.mavericks.bo
>> ########################################################################
>> 100.0%
>> ==> Pouring
>> freetype-2.5.5.mavericks.bottle.tar.gz
>> ? /usr/local/Cellar/freetype/2.5.5: 60
>> files, 2.6M
>> ==> Installing therion dependency: xz
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/xz-5.2.1.mavericks.bottle.t
>> ########################################################################
>> 100.0%
>> ==> Pouring xz-5.2.1.mavericks.bottle.tar.gz
>> ? /usr/local/Cellar/xz/5.2.1: 59 files, 1.7M
>> ==> Installing therion dependency: libtool
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/libtool-2.4.6.mavericks.bot
>> ########################################################################
>> 100.0%
>> ==> Pouring
>> libtool-2.4.6.mavericks.bottle.tar.gz
>> ==> Caveats
>> In order to prevent conflicts with Apple's
>> own libtool we have prepended a "g"
>> so, you have instead: glibtool and glibtoolize.
>> ==> Summary
>> ? /usr/local/Cellar/libtool/2.4.6: 69
>> files, 3.8M
>> ==> Installing therion dependency: jpeg
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/jpeg-8d.mavericks.bottle.2.
>> ########################################################################
>> 100.0%
>> ==> Pouring jpeg-8d.mavericks.bottle.2.tar.gz
>> ? /usr/local/Cellar/jpeg/8d: 18 files, 780K
>> ==> Installing therion dependency: imagemagick
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/imagemagick-6.9.1-1.maveric
>> ########################################################################
>> 100.0%
>> ==> Pouring
>> imagemagick-6.9.1-1.mavericks.bottle.tar.gz
>> ? /usr/local/Cellar/imagemagick/6.9.1-1:
>> 1442 files, 22M
>> ==> Installing therion dependency:
>> lcdf-typetools
>> ==> Downloading
>> http://www.lcdf.org/type/lcdf-typetools-2.104.tar.gz
>> ########################################################################
>> 100.0%
>> ==> ./configure
>> --prefix=/usr/local/Cellar/lcdf-typetools/2.104
>> --without-kpaths
>> ==> make install
>> ? /usr/local/Cellar/lcdf-typetools/2.104:
>> 29 files, 4.1M, built in 20 seconds
>> ==> Installing therion dependency: cmake
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/cmake-3.2.2.mavericks.bottl
>> ########################################################################
>> 100.0%
>> ==> Pouring cmake-3.2.2.mavericks.bottle.tar.gz
>> ? /usr/local/Cellar/cmake/3.2.2: 1847
>> files, 32M
>> ==> Installing therion dependency: boost
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/boost-1.57.0.mavericks.bott
>> ########################################################################
>> 100.0%
>> ==> Pouring boost-1.57.0.mavericks.bottle.tar.gz
>> ? /usr/local/Cellar/boost/1.57.0: 10572
>> files, 439M
>> ==> Installing therion dependency: fontconfig
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/fontconfig-2.11.1.mavericks
>> ########################################################################
>> 100.0%
>> ==> Pouring
>> fontconfig-2.11.1.mavericks.bottle.3.tar.gz
>> ==>
>> /usr/local/Cellar/fontconfig/2.11.1/bin/fc-cache
>> -frv
>> xtherion?
>> /usr/local/Cellar/fontconfig/2.11.1: 448
>> files, 3.6M
>> ==> Installing therion dependency: szip
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/szip-2.1.mavericks.bottle.t
>> ########################################################################
>> 100.0%
>> ==> Pouring szip-2.1.mavericks.bottle.tar.gz
>> ? /usr/local/Cellar/szip/2.1: 9 files, 136K
>> ==> Installing therion dependency: hdf5
>> ==> Downloading
>> https://homebrew.bintray.com/bottles-science/hdf5-1.8.14.maveric
>> ########################################################################
>> 100.0%
>> ==> Pouring
>> hdf5-1.8.14.mavericks.bottle.2.tar.gz
>> ? /usr/local/Cellar/hdf5/1.8.14: 174 files, 11M
>> ==> Installing therion dependency: libtiff
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/libtiff-4.0.3.mavericks.bot
>> ########################################################################
>> 100.0%
>> ==> Pouring
>> libtiff-4.0.3.mavericks.bottle.tar.gz
>> ? /usr/local/Cellar/libtiff/4.0.3: 254
>> files, 3.8M
>> ==> Installing therion dependency: vtk
>> ==> Downloading
>> http://www.vtk.org/files/release/6.2/VTK-6.2.0.tar.gz
>> ########################################################################
>> 100.0%
>> ==> cmake -DCMAKE_C_FLAGS_RELEASE=
>> -DCMAKE_CXX_FLAGS_RELEASE= -DCMAKE_INSTALL_PR
>> ==> make
>> xtherion
>> ==> make install
>> ==> Caveats
>> Even without the --with-qt option, you can
>> display native VTK render windows
>> from python. Alternatively, you can
>> integrate the RenderWindowInteractor
>> in PyQt, PySide, Tk or Wx at runtime. Read more:
>> import vtk.qt4; help(vtk.qt4) or import
>> vtk.wx; help(vtk.wx)
>>
>>
>> Python modules have been installed and
>> Homebrew's site-packages is not
>> in your Python sys.path, so you will not be
>> able to import the modules
>> this formula installed. If you plan to
>> develop with these modules,
>> please run:
>> mkdir -p
>> /Users/Rob/Library/Python/2.7/lib/python/site-packages
>> echo 'import site;
>> site.addsitedir("/usr/local/lib/python2.7/site-packages")'
>>>>
>> /Users/Rob/Library/Python/2.7/lib/python/site-packages/homebrew.pth
>> ==> Summary
>> ? /usr/local/Cellar/vtk/6.2.0: 3186 files,
>> 125M, built in 21.4 minutes
>> ==> Installing therion dependency: wxmac
>> ==> Downloading
>> https://homebrew.bintray.com/bottles/wxmac-3.0.2.mavericks.bottl
>> ########################################################################
>> 100.0%
>> ==> Pouring
>> wxmac-3.0.2.mavericks.bottle.9.tar.gz
>> ? /usr/local/Cellar/wxmac/3.0.2: 777 files, 41M
>> ==> Installing therion
>> ==> Downloading
>> http://therion.speleo.sk/downloads/therion-5.3.16.tar.gz
>> ########################################################################
>> 100.0%
>> ==> make config-macosx
>> ==> make
>> ==> make install
>> ? /usr/local/Cellar/therion/5.3.16: 6
>> files, 4.4M, built in 50 seconds
>> Roberts-MacBook-Pro:~ Rob$ xtherionxtherion
>> -bash: xtherionxtherion: command not found
>> Roberts-MacBook-Pro:~ Rob$ xtherion
>>
>> _____________________________________________________
>>
>> A program named WISH opened and window named
>> therion compiler. The Status bar at the
>> bottom read ?User interface is not active.
>> To activate it open and existing file or
>> create a new one."
>> When I try to open a file with either the
>> Wish file|open or the folder button I am
>> unable to open any files in the Demo data
>> set - they are all grey and cannot be selected.
>>
>> I am a first time user. Previously used On
>> Station and the Walls. I had data for 3
>> major caving areas in Walls totalling about
>> 50 km of cave. I want to switch it all to
>> Therion but if I can?t get the program to
>> work then I?ll have to stick with Walls.
>>
>> Rob Countess
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> <http://mailman.speleo.sk/pipermail/therion/attachments/20150418/4f466a3f/attachment.htm>
>>
>> ------------------------------
>>
>> _______________________________________________
>> Therion mailing list
>> Therion at speleo.sk <mailto:Therion at speleo.sk>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>>
>>
>> End of Therion Digest, Vol 112, Issue 4
>> ***************************************
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> <http://mailman.speleo.sk/pipermail/therion/attachments/20150418/dc6924bd/attachment.htm>
>>
>> ------------------------------
>>
>> _______________________________________________
>> Therion mailing list
>> Therion at speleo.sk <mailto:Therion at speleo.sk>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>>
>>
>> End of Therion Digest, Vol 112, Issue 5
>> ***************************************
>>
>> _______________________________________________
>> Therion mailing list
>> Therion at speleo.sk <mailto:Therion at speleo.sk>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>>
>> _______________________________________________
>> Therion mailing list
>> Therion at speleo.sk <mailto:Therion at speleo.sk>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>>
>> _______________________________________________
>> Therion mailing list
>> Therion at speleo.sk <mailto:Therion at speleo.sk>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>>
>> _______________________________________________
>> Therion mailing list
>> Therion at speleo.sk <mailto:Therion at speleo.sk>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>>
>>
>> --
>>
>> -------------------------
>> Xavier Pennec
>> Senior Research Scientist / Directeur de recherche
>> Asclepios project-team, INRIA Sophia-Antipolis
>> 2004 Route des Lucioles, BP93
>> F-06902 Sophia-Antipolis Cedex, France
>> +33 4 92 38 76 64 <tel:%2B33%204%2092%2038%2076%2064>
>> +33 6 78 35 16 90 <tel:%2B33%206%2078%2035%2016%2090>
>> http://www-sop.inria.fr/asclepios/
>> -------------------------------
>>
>>
>>
>> _______________________________________________
>> Therion mailing list
>> Therion at speleo.sk <mailto:Therion at speleo.sk>
>> http://mailman.speleo.sk/mailman/listinfo/therion
>>
>>
>>
>>
>> _______________________________________________
>> Therion mailing list
>> Therion at speleo.sk
>> http://mailman.speleo.sk/mailman/listinfo/therion
>>
> _______________________________________________
> Therion mailing list
> Therion at speleo.sk
> http://mailman.speleo.sk/mailman/listinfo/therion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20150423/0f3c1198/attachment.htm>
More information about the Therion
mailing list