[Therion] scale image

[Bruce Mutton]

It was late for me last night.

A correction to my earlier post

"Small glitches: Two bottom right lines in isler.th2 needed reversing (tick
the reverse box) so the yellow arrow points inside the passage."

Also I changed the scale, so the xvi file plots incorrectly in the map
editor now.  Simply change the scale back to 1:200 to fix it.

 

A couple more things.

 

The points in your file middle .th2 were incorrectly named, should be like.

-name 2 at middle

 

And try adding 

export model -o model.lox

to your thconfig file.  Gives a 3D model to better visualize.

 

First time I've seen a diving survey done in Therion.  I'm learning too.

(I think that with my initial posts a few days ago I was answering quite a
different question)

 

Bruce

 

  _____  

From: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] On Behalf
Of andrea.marassich at email.it
Sent: Wednesday, 15 October 2008 10:50 p.m.
To: List for Therion users
Subject: Re: [Therion] scale image

 

Thanks a lot.....

Andrea

--------- Original Message --------
Da: "List for Therion users" <therion at speleo.sk>
To: "'List for Therion users'" <therion at speleo.sk>
Oggetto: Re: [Therion] scale image
Data: 15/10/08 13:23




Hi Andrea

I've got an output of sorts.  (You can rename the thc file to txt)

 

Errors that stopped your files compiling mainly to do with misnaming.

File extensions missing in your thconfig file, selection of the map to plot
missing.

 

 

Small glitches: Two bottom lines in isler.th2 needed reversing (tick the
reverse box) so the yellow arrow points inside the passage.

 

Hope this gets you started again.

Bruce

 

 


  _____  


From: therion-bounces at speleo.sk [mailto:therion-bounces at speleo.sk] On Behalf
Of andrea.marassich at email.it
Sent: Wednesday, 15 October 2008 9:08 p.m.
To: List for Therion users
Subject: Re: [Therion] scale image

 

Hi,

 sorry to bother you again with this issue, which probably is little bit
beyond basics and beyond my current understanding of Therion, but it' the
cave I'm working on, so I'm just in need of the output :)

I just attach the files, hope it works. Maybe there's some very basic
misunderstanding....not just the connection of the scraps.

thanks a bunch

Andrea

 

--------- Original Message --------
Da: "List for Therion users" <therion at speleo.sk>
To: "List for Therion users" <therion at speleo.sk>
Oggetto: Re: [Therion] scale image
Data: 14/10/08 17:31



Hi Andrea,

first sorry for the late answer, I am a little bit busy right now.

Just to be sure, that I understand your problem correctly:

You have an old drawing of some cave part without any centreline data,
but you are able to map two stations in that drawing to stations in
your centreline. Is this correct?

If this is the situation, all you need to do is to add these two
stations to this scrap and reference them with "-name" option to t he
names you know as you do for scraps where you have complete
centreline. And new scrap should be placed correctly - I believe. More
complicated it would be, if you will have just one or no station, but
even this is feasible.

If it does not help you, do not hesitate to send me some sample data
that demonstrate your problem. My be I did not understood your problem
correctly.

Regards, S.

On Fri, Oct 10, 2008 at 3:59 PM, <andrea.marassich at email.it> wrote:
> Sorry, forgot to mention two stations of my centerline are located into
the
> image I can draw and which is without scale.
>
> hope this give you enough information.
>
> best,
>
> Andrea Marassich
>
> Hi,
>
> sorry to bother with a beginner question, but cannot make it even reading
> through the archives.
>
> I have a .th file with centerline an d .th2 file with his scraps.
>
> Now I should add to this a th2 file with an image of an old survey. I
drawed
> walls and all objects in the scrap but do not know the scale and do not
have
> original data of the centerline.
>
> How can I put together my centerline/scrap of known scale with this image?
> Do not know how to do it and I'm having dificulty understanding how the
> scale process is working.
>
> could you help me on this?
>
> thanks a lot
>
> Andrea Marassich
>
> _______________________________________________
> Therion mailing list
> Therion at speleo.sk
> http://mailman.speleo.sk/mailman/listinfo/therion
>
>
_______________________________________________
Therion mai ling list
Therion at speleo.sk
http://mailman.speleo.sk/mailman/listinfo/therion

 


  _____  



_______________________________________________
Therion mailing list
Therion at speleo.sk
http://mailman.speleo.sk/mailman/listinfo/therion



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20081016/f0379c94/attachment.htm>