Hello, that is not the case here: the sole drawer was myself and there is no overlap (i know of - the data is self contained in that folder). The scraps are like this: map 1-Deckenschlot-vor-KPZ 1.1-2-26a-SP1-Aufstieg # <- has stations, is OK 1.1-2-26a-SP1 # <- has stations, is OK 1.1-2-26a-SP2 # <- last known station at start. OK until the middle of the scrap! 1.1-2-26a-SP3 # <- no station; joined to 1.1-2-26a-SP2, completely "endless chimney" endmap What puzzles me is that the chimney starts at a bend in my scrap. The altitude range is that of the entire cave, and thus the "endless-chimney" is very prominent; I think this is a second issue we should tackle also (it will somewhat help with the issue here, but not solve it). Am 2021-02-02 10:01, schrieb Martin Sluka via Therion:
Hi Beni
that is not a problem of „spikes“ but as you may see on attached picture I had the same problem with one my project.
There were two scraps covered part the same area overlapped. Surveyed in two different surveying trips by two different groups drawn by two different people. As a result that overlapped area created something as infinite vertical chimney.
I had to comment one scrap in time from that part of cave and checked the result. Than I shorted one of those particular scraps and added correct join.
HTH
Martin
2. 2. 2021 v 9:48, Benedikt Hallinger <beni@hallinger.org>:
Hm, that didn't help, unfortunately. in the meantime I also tried coloring the PDF by altitude, this is not affected and working like expected.
Martin has readonly svn access to the data and may investigate in the dataset? I just unlocked it for that purpose.
The affected thconfig is svn/Hirlatzhoehle/Zubringer/therion/thconfig and the scrap in question is in svn/Hirlatzhoehle/Zubringer/1/therion/1.1.plan-2-b.th2 The last known station is 1.2.26j
In the thconfig I noted the following (just local here)
# Hirlatzdaten importieren source ../../../Hirlatzhoehle/therion/Hirlatzhoehle.th [1] # wrong dimensions in lox #source ../../../Hirlatzhoehle/Zubringer/therion/Zubringer.th [2] # works somewhat-ok in lox (still extruded to top of box, but the box itself is small)
Greetings, Beni
Am 2021-02-02 6:31, schrieb Stacho Mudrak: In that case and if there is just one station in this wrong scrap, maybe inserting point dimensions with some reasonable -value [<up> <down> m] over this station in the scrap should help to normalize these crazy heights. If there are no up/down data in the centreline, therion calculates up/down dimensions from shots from a given station. It is not a perfect algorithm and in your case, there is some issue. Placing a point dimension close to the station should override this calculation. HTH, S. On Mon, 1 Feb 2021 at 23:10, Benedikt Hallinger <beni@hallinger.org> wrote: It's hard to isolate. The structure is like this: Hirlatzhoehle/Zubringer/, where Zubringer contains more surveys. Each folder has its own therion/ subfolder containing the therion sources. If i do "source ../../../Hirlatzhoehle/therion/Hirlatzhoehle.th [1]" the bug occurs. That command sources the entire cave. If i do source just the region with "source ../../../Hirlatzhoehle/Zubringer/therion/Zubringer.th [2]" (which contains essentially the same maps and scraps!) the bug occurs. I have no idea how to track this don further, since we already talk about alot of data (2.4 km). Am 2021-02-01 21:37, schrieb Benedikt Hallinger: I try to boil it down Am 2021-02-01 21:12, schrieb Stacho Mudrak: Hmmm, even scraps extending far beyond a known station could cause a
problem - usually, it is the case with steep passages. In your case,
it looks like some outline problem. Are you able to isolate such scrap and send me some minimalistic sample? Thanks, S. On Mon, 1 Feb 2021 at 20:10, Benedikt Hallinger <beni@hallinger.org>
wrote: Hi, thanks for responding, i have the problem only tested with the lox. The red box fits nicely my selected data. The survex file also is OK. Probably it's caused by artifacts, see screenshot. Thats an old bug, and caused by some scraps extending far beyond a
known station (walls are marked unsurveyed). Am 2021-02-01 19:52, schrieb Stacho Mudrak: Hi Beni, thanks for review. Are you having coloring problem with .lox file or .pdf map? I have tried on my dataset, but when I select whole cave - entire
color range is used - from magenta to red. When I select just a part of the cave, coloring changes and the whole range is used for selected part. Does your red rectangle fit selected data or is it much bigger? If
the latter is the case, there must be some artifacts still remaining -
that were not removed with selection. Maybe some stations? Does this problem remain also with aven .3d export? It would be great if we could find this bug before therion goes to
debian release. S. On Mon, 1 Feb 2021 at 10:17, Benedikt Hallinger <beni@hallinger.org> wrote: Checked it, looks good for me (data selection, and pdf map printout
with people showing up again), with one exception: - I source all of the cave's data. (ok) - Then i select jsut a part of it. (ok) - The lox output contains just the selected part (ok) - The altitude coloring is all the same, despite having significant
altitude changes in the dataset. The reason seems to be that the coloring is done according in relation to ALL the cave, not just the selected parts - in comparison to
the entire system the altitude difference is negligible, but i expected
the lox to generate the altitude band according to the actual min/max
values of the selected dataset. $ therion -v therion 5.5.6 (2020-12-27) - using Proj 7.2.1, compiled against 7.2.1 But: therion compile cdf201b5bf921 has the same behaviour. Am 2021-01-27 8:59, schrieb Benedikt Hallinger: I just did apt-get update, and see 5.5.6ds1-5 That is the old version, right? I do wait for 5.5.6ds1-6 ? Am 2021-01-26 16:16, schrieb Wookey: On 2021-01-24 14:40 +0100, Benedikt Hallinger wrote: Wookey, when is this expected to appear in testing? I would test it It's there now. Wookey _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion__________________________________...
Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Links: ------ [1] http://hirlatzhoehle.th [2] http://zubringer.th _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion