I am working on a map where there is a long section of very low belly crawl. Most of the passage is between about 6 inches and 15 inches high. I would like to use values in the passage height symbols which reflect the height with a bit more accuracy than seems to be default. It appears that the passage height symbol will take any value, but for display it is rounded down. For example, "-value [0.5 ft]" becomes 0 when the map is compiled. [1 ft] becomes 1, as expected. [1.5] remains at 1. I tried specifying a value in centimeters as "-value [12 cm]" but that still came out as 0 on the compiled map. It did not produce an error - it just did not display as I wanted. With passage height values over about 3 or 4 feet the decimals are not all that important. In passage this low, however, the difference between 6 inches and 12 inches is the difference between not passable and passable. Therefore I think it is important to make the distinction. Is there a way to make the passage height symbol use the actual value provided? ======== Bill Gee