[Therion] 2 Map-connection issue - Going to four levels - Offset tests SAMD-ITF-IS example

[Bruce Mutton]

Interesting Martin

Your example mostly demonstrates one level of offset, but it goes to two
levels bottom-left (to blue to purple), and apparently three levels at the
bottom (to green to blue to dark blue).  However looking closely it seems
that the map-connection line to blue goes directly from yellow (ie not from
green).  If this is the case there are two scenarios: 



Scenario 1 - based on the map-connection line I have highlighted, both the
green and blue are first-level offsets.  I may be mistaken as the image is
not sufficiently clear.

If it is two levels of offset, then that is not sufficient to trigger the
'bug' David and I have described.

If it is three levels of offset, then you have somehow managed to avoid the
'bug' and the map-connection lines/points are coincidentally on the same
alignment.

 

Scenario 2 - is that this example demonstrates the 'bug' described, if not
particularly clearly.  My synopsis of the bug was "the line created by point
map-connection is only correctly originating from its parent map at the most
deeply nested level of offset and at the 1st level offset.  At all other
(intermediate) offset levels, the map-connection line reverts to originating
from the top-level map, and not from its direct parent."

 

So Martin, if you could perhaps clarify.  I suggest adding a horizontal
component to the light blue map in my snip above, and confirming whether the
map offsets are two or three level.

If it is two level, it does not test the bug. If it is three level and there
is no 'bug', the map connection line, blue to dark blue, should radiate from
blue and not from yellow.

 

Tarquin

I'll respond to your message later - off to work now!

 

Thanks

Bruce

 

From: Therion <therion-bounces at speleo.sk> On Behalf Of Martin Sluka via
Therion
Sent: Wednesday, 15 March 2023 23:08
To: List for Therion users <therion at speleo.sk>
Cc: Martin Sluka <martinsluka at mac.com>
Subject: Re: [Therion] 2 Map-connection issue - Going to four levels -
Offset tests SAMD-ITF-IS example

 

Just a sample. Colorised by altitude.

 

M.

 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20230316/7997aaaf/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 660866 bytes
Desc: not available
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20230316/7997aaaf/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 160465 bytes
Desc: not available
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20230316/7997aaaf/attachment-0003.png>