[Therion] kml export is not working
Torsten Schnitter
torsten.schnitter at netcologne.de
Thu Dec 5 08:51:47 CET 2019
Hi Alastair, hi Henry
Thanks for your thoughts.
Unfortunately it doesn't make any difference.
Coordinate system lat-long is supported as you can read in the Therion book on page 14.
Therefore I don't see a reason not to use it. Beside this it did work in the past (can't say on which Therion version it was).
And with some of the select statements it still works with lat-long.
But I also tried to use "cs UTM31N".
This didn't make any difference.
Same select statements are working or not... like with "cs lat-long".
regards,
Torsten
> alastair gott <alastairgott at hotmail.com> hat am 4. Dezember 2019 um 19:35 geschrieben:
>
> Hi Torsten,
>
> Would it be cs UTM31N (I use UTM30N for spain so assume that you're UTM31N for the lot)
>
> I find the UTM from geoplaner normally, not sure who suggested it, but it's a good shout https://www.geoplaner.com/
>
> Worth checking it out on Geoplaner, as its giving me the UTM31N for your coordinates as being 390214 4960303
>
> so i'd say you should try:
> cs UTM31N
> fix 9 0 390214 4960303 105
>
> Marco gives a couple of the coordinate systems that you can use
>
> http://marcocorvi.altervista.org/caving/tbe/m_02/m_02a.htm
>
> Marco doesn't give cs osgb:sk but I know it can be used (If it's in the uk, because of course the British have to be different 🙁 )
>
>
> Regards,
> Alastair Gott.
>
> AlastairGott at hotmail.com,
> M: 07931779380.
>
>
> ---------------------------------------------
> From: Therion <therion-bounces at speleo.sk> on behalf of Henry.Bennett at dell.com <Henry.Bennett at dell.com>
> Sent: 04 December 2019 16:52
> To: therion at speleo.sk <therion at speleo.sk>
> Subject: Re: [Therion] kml export is not working
>
> Pretty sure you can’t use “CS lat-long”. I can get it to work by stripping back to just using reseau_de_louysse_surveys_dry2_2012_09.th and swapping it for “cs EPSG:32651” but then it puts it in completely the wrong place, however it does populate the kml file correctly.
>
> Henry
>
> From: Therion <therion-bounces at speleo.sk> On Behalf Of Nick Bairstow
> Sent: 03 December 2019 11:44
> To: List for Therion users
> Subject: Re: [Therion] kml export is not working
>
> [EXTERNAL EMAIL]
> >As far as I know you only need a geo reference within your survey network.
> >But you don't need to have a geo reference within your selected data for output.
> >Am I wrong with that?
> You are correct, as long as you input the georeferenced survey in the top level directory you can toggle any output on and off with select in the survey structure.
>
> I had a quick look at your files and struggled a bit with the structure, I will try and work it out tonight.
>
> From: Therion [mailto:therion-bounces at speleo.sk] On Behalf Of Torsten Schnitter via Therion
> Sent: 03 December 2019 07:41
> To: List for Therion users <therion at speleo.sk mailto:therion at speleo.sk >
> Cc: Torsten Schnitter <torsten.schnitter at netcologne.de mailto:torsten.schnitter at netcologne.de >
> Subject: Re: [Therion] kml export is not working
>
> Hello
> I have stripped down all the data to the minimum.
> You can find all attached in the zip file.
> As far as I know you only need a geo reference within your survey network.
> But you don't need to have a geo reference within your selected data for output.
> Am I wrong with that?
> Anyhow.
> If you have a look at the "thconfig-survey.thc" file you can find some "DOES NOT WORK" and "DOES WORK" statements.
> Beside this when not selecting anything it also does work with the kml export.
> What also does NOT work is selecting all lines (wihat should be the same as selecting nothing).
> When I do select the map "survey_southpassage_plan_m" it does work.
> This map does have the same lines like the first part in the thconfig-survey.thc file which is not working.
> May be there is something wrong in the select command?
> regards,
> Torsten
>
> > > Nick Bairstow <Nick at pff.uk.com mailto:Nick at pff.uk.com > hat am 2. Dezember 2019 um 23:19 geschrieben:
> >
> > Just got there before me John. You are correct no coords but there is not much else either. I can edit the kml and insert coords name and icon and the file opens as expected but no centreline/splays or map outline in the case of model output. Also, if you try to compile Therion and ask for kml output and there are no coords in the .th then it fails with a warning.
> > I think there is something else going on and we need to see all the data.
> >
> > From: Therion <therion-bounces at speleo.sk mailto:therion-bounces at speleo.sk > On Behalf Of John Stevens
> > Sent: 02 December 2019 21:38
> > To: therion at speleo.sk mailto:therion at speleo.sk
> > Subject: Re: [Therion] kml export is not working
> >
> > Looking at the kml file, I don't see the geo referenced points. By taking just part of the system, have you cut out a fixed point for the kml. This is a problem I have found when doing part of a system.
> >
> >
> >
> > From: Torsten Schnitter via Therion
> > Sent: Monday, December 2, 2019 1:35 PM
> > To: therion at speleo.sk mailto:therion at speleo.sk
> > Cc: Torsten Schnitter
> > Subject: [Therion] kml export is not working
> >
> > Hello
> > I have some problems with exporting a kml file and I wonder what I'm doing wrong.
> > I'm using Therion 5.4.4 (2019-05-01) on Windows 7.
> > Aim is to just get the survey lines from a part of the cave system into a kml file.
> > In the thconfig file I select several lines with the "select command".
> > (I used to do this with double click on the data structure on the right side from the compiler window)
> > Generating a pdf file with:
> > export map -fmt pdf -proj plan -o _Output\Reseau_de_lOuysse_southpassage_2019.pdf -layout layout_plan
> > is doing exactly what I want to have.
> > The result is just the survey data from a part of the complete cave system.
> > But exporting a kml file with the same selected lines fails:
> > export model -fmt kml -o _Output\Reseau_de_lOuysse_southpassage_2019.kml
> > This file does not have any survey data in it.
> > Both files are attached.
> > Does anybody have any idea what I'm doing wrong?
> > regards,
> > Torsten
> >
> > ---------------------------------------------
> > _______________________________________________
> > Therion mailing list
> > Therion at speleo.sk mailto:Therion at speleo.sk
> > https://mailman.speleo.sk/listinfo/therion https://mailman.speleo.sk/listinfo/therion
> >
> > >
>
>
> > > _______________________________________________
> > Therion mailing list
> > Therion at speleo.sk mailto:Therion at speleo.sk
> > https://mailman.speleo.sk/listinfo/therion
> >
> > >
>
>
> _______________________________________________
> Therion mailing list
> Therion at speleo.sk
> https://mailman.speleo.sk/listinfo/therion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20191205/49119cdc/attachment.htm>
More information about the Therion
mailing list