[Therion] Экспорт в KML

[Bruce Mutton]

Yes it does make a difference. Define a cave with the survey definition. Define secondary entrances within centrelines.See the difference if you export caves to a html file. For best effect you can do this for a multi cave project where each cave has multiple entrances.  I will post example outputs later.I suspect the kml exports are not reporting the hierachy however.
Bruce
Sent from my Samsung device, hence the typo's

-------- Original message --------
From: Владимир Георгиев via Therion <therion at speleo.sk> 
Date: 28/01/18  10:16  (GMT+12:00) 
To: List for Therion users <therion at speleo.sk> 
Cc: Владимир Георгиев <vld.georgiev at gmail.com> 
Subject: Re: [Therion] Экспорт в KML 

Bruce

Yes, that's right, you can define any number of entrances like this.
Although I admit I haven't used the "survey 01 -title “Some Cave name” -entrance 1" syntax. So far I have always listed the entrances within the surveys with several  "station XX "Some other entrance name" entrance" lines.

Does it make a difference which syntax is used?

Vlad

On Sat, Jan 27, 2018 at 11:01 PM, Bruce Mutton via Therion <therion at speleo.sk> wrote:
And I have no Russian, but making assumptions based on Vladimir’s response…(and apologising for using English) There are more subtle nuances that can be conveyed.Have a look at https://therion.speleo.sk/wiki/drawingchecklist?s[]=entrance#points and scroll down to ‘Passage Ends’ point entrance.You can tell Therion to define a cave, and further, specifically define all the entrances that the ‘cave’ has. To expand on and change Vladimir’s example survey 01 -title “Some Cave name” -entrance 1  #defining the entrance here as part of survey definition tells Therion ‘it is a cave’  centerline
    cs lat-long
    fix 0 11:22:33.4 22:33:44.5 1234  # set the GPS coordinates and elevation of station 0
    station 3 "Some other entrance name" entrance        # Mark station 3 as another entrance of ‘Some Cave name’ cave, and display it’s name also     …  endcenterlineendsurvey

Have I got that right Vlad?Bruce  From: Therion [mailto:therion-bounces at speleo.sk] On Behalf Of ???????? ???????? via Therion
Sent: Sunday, 28 January 2018 7:18 AM
To: List for Therion users <therion at speleo.sk>
Cc: Владимир Георгиев <vld.georgiev at gmail.com>
Subject: Re: [Therion] Экспорт в KML Hi

My Russian is not that good, so I will reply in English.The kml model can export the entrances, if that is what you mean by "объектов". To get the name of the cave to display, you have to mark one or more stations as entrances. Something like this:

  centerline
    cs lat-long
    fix 0 11:22:33.4 22:33:44.5 1234  # set the GPS coordinates and elevation of station 0
    station 0 "Some cave name" entrance  # Mark station 0 as an entrance and set the name to be displayed. Not necessarily the same station as the one with the coords.
  ...Vladimir  2018-01-26 11:08 GMT+02:00 Кунгурская лаборатория-стационар via Therion <therion at speleo.sk>:Здравствуйте.  Подскажите, пожалуйста. Я пытаюсь экспортировать данные
в KML-файл. Вот строка

export model -fmt kml -output Kungur_Z.kml

При   просмотре   kml-файла   он   не  отображает названия объектов, а
отображаются только линии.

Подскажите,  пожалуйста, как сделать так, чтобы названия объектов тоже
отображались?

 
_______________________________________________

Therion mailing list

Therion at speleo.sk

https://mailman.speleo.sk/listinfo/therion




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20180128/229f53d0/attachment.htm>