[Therion] extention at the rear of the Distox

[Markus Boldt]

Oh, that`s very good Bruce, thanks a lot! 

Markus

 

Von: Therion [mailto:therion-bounces at speleo.sk] Im Auftrag von Bruce Mutton via Therion
Gesendet: Dienstag, 28. August 2018 21:19
An: 'List for Therion users'
Cc: Bruce Mutton
Betreff: [Therion] extention at the rear of the Distox

 

Markus

You might find the attached quick reference sheet helpful.

 

Regarding adjustment of measurements in Therion, if you happen to have uncorrected disto measurements, you can use the calibrate statement to amend all measurements in a particular survey with a single short line.

 

calibrate <quantity list> <zero error> [<scale>] ▷ set the instrument calibration. The measured value is calculated using the following formula: measured value = (read value - zero error) × scale. The supported quantities are the same as sd.  ie length, tape, bearing, compass, gradient, clino, counter, depth, x, y, z, position, easting, dx, northing, dy, altitude, dz

 

Bruce

 

From: Therion <therion-bounces at speleo.sk> On Behalf Of Martin Sluka via Therion
Sent: Wednesday, 29 August 2018 01:16
To: List for Therion users <therion at speleo.sk>
Cc: Martin Sluka <martinsluka at mac.com>
Subject: Re: [Therion] extention at the rear of the Distox

 

Device Information

The FUNC key can be used to show a sequence of information screens. FUNC key in idle

mode shows the first screen. FUNC again navigates from one screen to the next. Use the

SMART key to return to the previous screen.

Screen 4: Endpiece Offset

Shows the actual endpiece offset in mm (-128 - 127).

To change the level first press the PLUS and MINUS keys for 2 seconds to allow editing.

Then press the PLUS or MINUS key to change the value.

Changing the offset is useful for self-made endpieces or other cases where a non-standard

reference is used.

 

M.

 

 

28. 8. 2018 v 14:48, Markus Boldt via Therion <therion at speleo.sk>:

 

Hi, 

Evaristo and Martin have showed extentions for the Distox. It is a very good Idea. But what is with the so extended length of the distance? Must I change all measurings by hand in the list of Pockettopo or Topodroid or is there a possibility to “say” that to the distox by default? 

Thanks for the answers. 

Regards 

Markus 

 

BTW: The meeting at Ebensee was very good and interesting for me as a “only” user. 

_______________________________________________
Therion mailing list
 <mailto:Therion at speleo.sk> Therion at speleo.sk
 <https://mailman.speleo.sk/listinfo/therion> https://mailman.speleo.sk/listinfo/therion

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20180828/9b503f50/attachment.htm>