[Therion] Outside and inside / Vertical smearing of 3d Models

[Bruce]

Andrew

My experience matches what Martin describes.

Since about version 5.2.8+- -outline in/out does not seem to have affected
pdf outputs much if at all.  However it is still of critical importance for
.lox and .kml

 

 

> http://www.ubss.org.uk/resources/surveys/survex/Charterhouse.lox

 

Your example would make a nice addition to the therion projects page
http://therion.speleo.sk/wiki/doku.php?id=projeurope 

You might like to add it, or give permission for someone else to

 

>Lots of the 'smearing' is from made up surveys, constructed from old plans.

 

I have had this effect where drawings extend beyond the influence of survey
stations (both 'real' and 'made-up' surveys).  Any tips as to how to prevent
or minimise this?

 

The Longwood cave (in the Charterhouse set above, screenshot below) seems to
have a matching survey centreline and model when viewed in plan, but the
model is still smeared and the elevations of the smeared 3d model do not
match the survey centreline.  I assume this is because the drawing is not
'connected' to the centreline by way of point 'survey-station's, and if it
were, presumably this view would become the more realistic 3d tube we are
accustomed to.



 

Bruce

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20100623/559b2426/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 42177 bytes
Desc: not available
URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20100623/559b2426/attachment.jpg>