5.3.9 on Debian wheezy I have obviously made a mistake when drawing up this elevation, as it is far to large. To try and get a clue I tried debug on It had compiled with debug off but gave an error with debug on (and all as well) **data.mp (mpost.mp (/usr/share/texlive/texmf-dist/metapost/base/plain.mp Preloading the plain mem file, version 1.004)) (./data.mp [4001] [4002] [4003] [4004] [4005] [4006] [4007] [4008] [4009] [4010] [4011] [4012]
(nan-47.616,nan-3.48695,1,0,0,1) ! Transform components aren't all known. <to be read again> endgroup data->...i;lab:=thelabel(SUFFIX2)((EXPR3),(EXPR4))
;if(EXPR6)>1:pickup.PenD.f... l.4815 ...char50 \mainfont{} etex,(nan,nan),0.0,6) ; I'm unable to apply a partially specified transformation except to a fully known pair or transform. Proceed, and I'll omit the transformation. debug first, station-names, second work thanks Andrew
Check 1.4 is in the right place on the section, cutting it out seems to work -----Original Message----- From: Andrew Atkinson Sent: Monday, November 12, 2012 10:23 AM To: List for Therion users Subject: [Therion] Debug giving error 5.3.9 on Debian wheezy I have obviously made a mistake when drawing up this elevation, as it is far to large. To try and get a clue I tried debug on It had compiled with debug off but gave an error with debug on (and all as well) **data.mp (mpost.mp (/usr/share/texlive/texmf-dist/metapost/base/plain.mp Preloading the plain mem file, version 1.004)) (./data.mp [4001] [4002] [4003] [4004] [4005] [4006] [4007] [4008] [4009] [4010] [4011] [4012]
(nan-47.616,nan-3.48695,1,0,0,1) ! Transform components aren't all known. <to be read again> endgroup data->...i;lab:=thelabel(SUFFIX2)((EXPR3),(EXPR4))
;if(EXPR6)>1:pickup.PenD.f... l.4815 ...char50 \mainfont{} etex,(nan,nan),0.0,6) ; I'm unable to apply a partially specified transformation except to a fully known pair or transform. Proceed, and I'll omit the transformation. debug first, station-names, second work thanks Andrew _______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2624/5889 - Release Date: 11/11/12
thanks, yep, I found it, using the first and second, it was more the fact it did not work with debug I was reporting Andrew On 12/11/12 11:03, John Stevens wrote:
Check 1.4 is in the right place on the section, cutting it out seems to work
-----Original Message----- From: Andrew Atkinson Sent: Monday, November 12, 2012 10:23 AM To: List for Therion users Subject: [Therion] Debug giving error 5.3.9 on Debian wheezy
I have obviously made a mistake when drawing up this elevation, as it is far to large. To try and get a clue I tried
debug on
It had compiled with debug off but gave an error with debug on (and all as well)
**data.mp (mpost.mp (/usr/share/texlive/texmf-dist/metapost/base/plain.mp Preloading the plain mem file, version 1.004)) (./data.mp [4001] [4002] [4003] [4004] [4005] [4006] [4007] [4008] [4009] [4010] [4011] [4012]
(nan-47.616,nan-3.48695,1,0,0,1) ! Transform components aren't all known. <to be read again> endgroup data->...i;lab:=thelabel(SUFFIX2)((EXPR3),(EXPR4))
;if(EXPR6)>1:pickup.PenD.f... l.4815 ...char50 \mainfont{} etex,(nan,nan),0.0,6) ; I'm unable to apply a partially specified transformation except to a fully known pair or transform. Proceed, and I'll omit the transformation.
debug first, station-names, second work
thanks
Andrew
_______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2624/5889 - Release Date: 11/11/12 _______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
Even if the point is in the right place you still get this error, its like a division by zero some where in the debug. Does the debug try to create localised scaling for points as this may generate zeros as it attempts to deal with an error. Tried to recreate error on my sections but failed. This is odd. Have you created the error on an even more simple set of data? -----Original Message----- From: Andrew Atkinson Sent: Monday, November 12, 2012 11:14 AM To: therion@speleo.sk Subject: Re: [Therion] Debug giving error thanks, yep, I found it, using the first and second, it was more the fact it did not work with debug I was reporting Andrew On 12/11/12 11:03, John Stevens wrote:
Check 1.4 is in the right place on the section, cutting it out seems to work
-----Original Message----- From: Andrew Atkinson Sent: Monday, November 12, 2012 10:23 AM To: List for Therion users Subject: [Therion] Debug giving error 5.3.9 on Debian wheezy
I have obviously made a mistake when drawing up this elevation, as it is far to large. To try and get a clue I tried
debug on
It had compiled with debug off but gave an error with debug on (and all as well)
**data.mp (mpost.mp (/usr/share/texlive/texmf-dist/metapost/base/plain.mp Preloading the plain mem file, version 1.004)) (./data.mp [4001] [4002] [4003] [4004] [4005] [4006] [4007] [4008] [4009] [4010] [4011] [4012]
(nan-47.616,nan-3.48695,1,0,0,1) ! Transform components aren't all known. <to be read again> endgroup data->...i;lab:=thelabel(SUFFIX2)((EXPR3),(EXPR4))
;if(EXPR6)>1:pickup.PenD.f... l.4815 ...char50 \mainfont{} etex,(nan,nan),0.0,6) ; I'm unable to apply a partially specified transformation except to a fully known pair or transform. Proceed, and I'll omit the transformation.
debug first, station-names, second work
thanks
Andrew
_______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2624/5889 - Release Date: 11/11/12 _______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2624/5889 - Release Date: 11/11/12
I did not think to try it after I had fixed the Elevation. it seemed to work with debug first debug second debug station-names All at the same time, not sure how the above is different from debug on I have do not get this with any of my other data, (not that I have tried them all) but most of the top level files work, apart from the one with fonts in? Andrew On 12/11/12 12:45, John Stevens wrote:
Even if the point is in the right place you still get this error, its like a division by zero some where in the debug. Does the debug try to create localised scaling for points as this may generate zeros as it attempts to deal with an error. Tried to recreate error on my sections but failed. This is odd. Have you created the error on an even more simple set of data?
-----Original Message----- From: Andrew Atkinson Sent: Monday, November 12, 2012 11:14 AM To: therion@speleo.sk Subject: Re: [Therion] Debug giving error
thanks, yep, I found it, using the first and second, it was more the fact it did not work with debug I was reporting
Andrew
On 12/11/12 11:03, John Stevens wrote:
Check 1.4 is in the right place on the section, cutting it out seems to work
-----Original Message----- From: Andrew Atkinson Sent: Monday, November 12, 2012 10:23 AM To: List for Therion users Subject: [Therion] Debug giving error 5.3.9 on Debian wheezy
I have obviously made a mistake when drawing up this elevation, as it is far to large. To try and get a clue I tried
debug on
It had compiled with debug off but gave an error with debug on (and all as well)
**data.mp (mpost.mp (/usr/share/texlive/texmf-dist/metapost/base/plain.mp Preloading the plain mem file, version 1.004)) (./data.mp [4001] [4002] [4003] [4004] [4005] [4006] [4007] [4008] [4009] [4010] [4011] [4012]
(nan-47.616,nan-3.48695,1,0,0,1) ! Transform components aren't all known. <to be read again> endgroup data->...i;lab:=thelabel(SUFFIX2)((EXPR3),(EXPR4))
;if(EXPR6)>1:pickup.PenD.f... l.4815 ...char50 \mainfont{} etex,(nan,nan),0.0,6) ; I'm unable to apply a partially specified transformation except to a fully known pair or transform. Proceed, and I'll omit the transformation.
debug first, station-names, second work
thanks
Andrew
_______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2624/5889 - Release Date: 11/11/12 _______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2624/5889 - Release Date: 11/11/12 _______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
I am not able to reproduce this bug with my current version of therion. So probably it is a bug already reported by Bruce (with debug scrap-names). It should be fixed in next version. S. On 12 November 2012 14:18, Andrew Atkinson <andrew@wotcc.org.uk> wrote:
I did not think to try it after I had fixed the Elevation. it seemed to work with
debug first debug second debug station-names
All at the same time, not sure how the above is different from
debug on
I have do not get this with any of my other data, (not that I have tried them all) but most of the top level files work, apart from the one with fonts in?
Andrew
On 12/11/12 12:45, John Stevens wrote:
Even if the point is in the right place you still get this error, its like a division by zero some where in the debug. Does the debug try to create localised scaling for points as this may generate zeros as it attempts to deal with an error. Tried to recreate error on my sections but failed. This is odd. Have you created the error on an even more simple set of data?
-----Original Message----- From: Andrew Atkinson Sent: Monday, November 12, 2012 11:14 AM To: therion@speleo.sk Subject: Re: [Therion] Debug giving error
thanks, yep, I found it, using the first and second, it was more the fact it did not work with debug I was reporting
Andrew
On 12/11/12 11:03, John Stevens wrote:
Check 1.4 is in the right place on the section, cutting it out seems to work
-----Original Message----- From: Andrew Atkinson Sent: Monday, November 12, 2012 10:23 AM To: List for Therion users Subject: [Therion] Debug giving error 5.3.9 on Debian wheezy
I have obviously made a mistake when drawing up this elevation, as it is far to large. To try and get a clue I tried
debug on
It had compiled with debug off but gave an error with debug on (and all as well)
**data.mp (mpost.mp (/usr/share/texlive/texmf-dist/metapost/base/plain.mp Preloading the plain mem file, version 1.004)) (./data.mp [4001] [4002] [4003] [4004] [4005] [4006] [4007] [4008] [4009] [4010] [4011] [4012]
(nan-47.616,nan-3.48695,1,0,0,1) ! Transform components aren't all known. <to be read again> endgroup data->...i;lab:=thelabel(SUFFIX2)((EXPR3),(EXPR4))
;if(EXPR6)>1:pickup.PenD.f... l.4815 ...char50 \mainfont{} etex,(nan,nan),0.0,6) ; I'm unable to apply a partially specified transformation except to a fully known pair or transform. Proceed, and I'll omit the transformation.
debug first, station-names, second work
thanks
Andrew
_______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2624/5889 - Release Date: 11/11/12 _______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2793 / Virus Database: 2624/5889 - Release Date: 11/11/12 _______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion
participants (3)
-
Andrew Atkinson -
John Stevens -
Stacho Mudrak