How to "equate" between two caves
Hello everyone - I have been working on a multi-cave project for a while. Each cave exists as its own separate set of files. A few months ago - with help from this group - I figured out how to get a single output file that contains all four cave maps. The combined map is generated from a single thconfig file that uses "source" commands to bring in the .th files from each of the member caves. Now we have surveyed a link between two of the four caves. I need to set up an "equate" command so that the two caves actually link up. According to Aven, the gap is about 30 feet. Some of that, I am sure, is due to rounding errors in the GPS locates for the two caves. Based on a message from Martin, I added a .th file which contains a "survey" command. However, that is generating an error from Therion: ========== therion 5.4.1 (2017-04-18) cavern - Survex 1.2.34 initialization file: /etc/therion.ini reading ... done This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts csr10 csti10 csbx10 csss10 csssi10 ... NOT INSTALLED This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts cmcyr10 cmcti10 cmcbx10 cmcss10 cmcssi10 ... NOT INSTALLED configuration file: thconfig reading ... therion: error -- BigCavernRanch.th [9] -- unknown configuration command -- survey =============== The thconfig and .th files I used are embedded below as text. Where should I put the "equate" command that will link the two caves? Thanks! -- Bill Gee ============= thconfig ============ encoding utf-8 input BigCavernRanch.th input ../TherionMasterFiles/CustomSymbolsCode.txt # This layout is for the main 2D map, all on one page layout basics units imperial scale-bar 50 feet page-numbers on north true rotate 0 symbol-color group centerline [80 20 0] symbol-color area water [0 0 100] map-comment "The caves of Big Cavern Ranch, Pulaski County, Missouri" statistics explo all legend on map-header 3 65 w symbol-set UIS # Section for PDF properties doc-author "Bill Gee" doc-title "The Caves of Big Cavern Ranch" doc-subject "The Caves of Big Cavern Ranch" # Section for map photos # Bring in the custom symbols copy CustomSymbols # Reassign names symbol-assign point gradient AMER symbol-assign point stalagmite AMER symbol-assign point stalactite AMER symbol-assign point pillar AMER symbol-assign point popcorn AMER endlayout layout mainmapnocolor copy basics symbol-show group centerline debug station-names scale 1 200 color map-fg [100 86 66] endlayout layout mainmapwithcolor copy basics symbol-show group centerline debug station-names scale 1 200 color map-fg altitude endlayout layout mainmapprint copy basics scale 1 800 debug off symbol-hide group centerline color map-fg [100 86 66] endlayout layout mainmapnocolor copy basics symbol-show group centerline debug station-names scale 1 200 color map-fg [100 86 66] endlayout layout mainmapwithcolor copy basics symbol-show group centerline debug station-names scale 1 200 color map-fg altitude endlayout layout mainmapprint copy basics scale 1 800 debug off symbol-hide group centerline color map-fg [100 86 66] endlayout # Change the legend callouts text en_US "point u:stalagmaflat_AMER" "stalagmaflat" text en_US "line u:dripline_AMER" "dripline" text en_US "point u:pendant" "pendant" text en_US "point u:stromatolite" "stromatolite" # Now list all the map files to be created. # The main plan map export map -proj plan -layout mainmapnocolor -o BigCavernRanch.pdf # The main map for printing export map -proj plan -layout mainmapprint -o BigCavernRanchPrint.pdf # Main plan map with elevations colorized export map -proj plan -layout mainmapwithcolor -o BigCavernRanchColored.pdf # Create an atlas map # export atlas -proj plan -layout mainmapnocolor -o BigCavernRanchAtlas.pdf # create a centerline map using XVI format # export map -proj plan -fmt xvi -o BigCavernRanch.xvi # Create a 3d map for use with Loch export model -fmt loch -o BigCavernRanch.lox # Create a 3d map for use with Survex/Aven export model -fmt 3d -o BigCavernRanch.3d # Create a KML file for Google Earth export map -proj plan -fmt kml -output BigCavernRanch.kml ========== BigCavernRanch.th =========== # Bring in subsidiary files # Name the input caves source ../AllieSpringCaveSurvey/AllieSpringCave.th source ../MillCreekCaveSurvey/MillCreekCave.th source ../ShiftyRockPit/ShiftyRockPit.th source ../CascadeCaverns/CascadeCaverns.th survey all equate AA42@ShiftyRockPit DR23@AllieSpringCave endsurvey
Bill, you should create higher level of survey, input all particular .th files and use it as source in thconfig. In that higher level survey you may eguate stations from different base level surveys. Martin S. Odesláno z iPhonu 26. 4. 2018 v 16:51, Bill Gee via Therion <therion@speleo.sk>:
Hello everyone -
I have been working on a multi-cave project for a while. Each cave exists as its own separate set of files. A few months ago - with help from this group - I figured out how to get a single output file that contains all four cave maps.
The combined map is generated from a single thconfig file that uses "source" commands to bring in the .th files from each of the member caves.
Now we have surveyed a link between two of the four caves. I need to set up an "equate" command so that the two caves actually link up. According to Aven, the gap is about 30 feet. Some of that, I am sure, is due to rounding errors in the GPS locates for the two caves.
Based on a message from Martin, I added a .th file which contains a "survey" command. However, that is generating an error from Therion:
========== therion 5.4.1 (2017-04-18) cavern - Survex 1.2.34 initialization file: /etc/therion.ini reading ... done This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts csr10 csti10 csbx10 csss10 csssi10 ... NOT INSTALLED This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts cmcyr10 cmcti10 cmcbx10 cmcss10 cmcssi10 ... NOT INSTALLED configuration file: thconfig reading ... therion: error -- BigCavernRanch.th [9] -- unknown configuration command -- survey ===============
The thconfig and .th files I used are embedded below as text.
Where should I put the "equate" command that will link the two caves?
Thanks! -- Bill Gee
============= thconfig ============ encoding utf-8
input BigCavernRanch.th input ../TherionMasterFiles/CustomSymbolsCode.txt
# This layout is for the main 2D map, all on one page layout basics units imperial scale-bar 50 feet page-numbers on north true rotate 0 symbol-color group centerline [80 20 0] symbol-color area water [0 0 100] map-comment "The caves of Big Cavern Ranch, Pulaski County, Missouri" statistics explo all legend on map-header 3 65 w symbol-set UIS
# Section for PDF properties doc-author "Bill Gee" doc-title "The Caves of Big Cavern Ranch" doc-subject "The Caves of Big Cavern Ranch"
# Section for map photos
# Bring in the custom symbols copy CustomSymbols
# Reassign names symbol-assign point gradient AMER symbol-assign point stalagmite AMER symbol-assign point stalactite AMER symbol-assign point pillar AMER symbol-assign point popcorn AMER
endlayout
layout mainmapnocolor copy basics symbol-show group centerline debug station-names scale 1 200 color map-fg [100 86 66] endlayout
layout mainmapwithcolor copy basics symbol-show group centerline debug station-names scale 1 200 color map-fg altitude endlayout
layout mainmapprint copy basics scale 1 800 debug off symbol-hide group centerline color map-fg [100 86 66] endlayout
layout mainmapnocolor copy basics symbol-show group centerline debug station-names scale 1 200 color map-fg [100 86 66] endlayout
layout mainmapwithcolor copy basics symbol-show group centerline debug station-names scale 1 200 color map-fg altitude endlayout
layout mainmapprint copy basics scale 1 800 debug off symbol-hide group centerline color map-fg [100 86 66] endlayout
# Change the legend callouts text en_US "point u:stalagmaflat_AMER" "stalagmaflat" text en_US "line u:dripline_AMER" "dripline" text en_US "point u:pendant" "pendant" text en_US "point u:stromatolite" "stromatolite"
# Now list all the map files to be created.
# The main plan map export map -proj plan -layout mainmapnocolor -o BigCavernRanch.pdf
# The main map for printing export map -proj plan -layout mainmapprint -o BigCavernRanchPrint.pdf
# Main plan map with elevations colorized export map -proj plan -layout mainmapwithcolor -o BigCavernRanchColored.pdf
# Create an atlas map # export atlas -proj plan -layout mainmapnocolor -o BigCavernRanchAtlas.pdf
# create a centerline map using XVI format # export map -proj plan -fmt xvi -o BigCavernRanch.xvi
# Create a 3d map for use with Loch export model -fmt loch -o BigCavernRanch.lox
# Create a 3d map for use with Survex/Aven export model -fmt 3d -o BigCavernRanch.3d
# Create a KML file for Google Earth export map -proj plan -fmt kml -output BigCavernRanch.kml
========== BigCavernRanch.th =========== # Bring in subsidiary files
# Name the input caves source ../AllieSpringCaveSurvey/AllieSpringCave.th source ../MillCreekCaveSurvey/MillCreekCave.th source ../ShiftyRockPit/ShiftyRockPit.th source ../CascadeCaverns/CascadeCaverns.th
survey all equate AA42@ShiftyRockPit DR23@AllieSpringCave endsurvey
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Hi Martin - I thought I *HAD* created a higher level of survey. That is what the BigCavernsRanch.th file does ... It imports surveys from the other projects by virtue of importing the .th files. The subsidiary .th files reference the centerline survey data through input statements. Right??? Or am I completely missing something? Maybe I should create a new file "AllMaps.th" which is nothing but an include of BigCavernsRanch.th??? Would that establish a new top-level survey? (confused in Kansas...) -- Bill Gee On Monday, April 30, 2018 12:54:29 PM CDT Martin Sluka via Therion wrote:
Bill, you should create higher level of survey, input all particular .th files and use it as source in thconfig. In that higher level survey you may eguate stations from different base level surveys.
Martin S.
Odesláno z iPhonu
26. 4. 2018 v 16:51, Bill Gee via Therion <therion@speleo.sk>:
Hello everyone -
I have been working on a multi-cave project for a while. Each cave exists as its own separate set of files. A few months ago - with help from this group - I figured out how to get a single output file that contains all four cave maps.
The combined map is generated from a single thconfig file that uses "source" commands to bring in the .th files from each of the member caves.
Now we have surveyed a link between two of the four caves. I need to set up an "equate" command so that the two caves actually link up. According to Aven, the gap is about 30 feet. Some of that, I am sure, is due to rounding errors in the GPS locates for the two caves.
Based on a message from Martin, I added a .th file which contains a "survey" command. However, that is generating an error from Therion:
========== therion 5.4.1 (2017-04-18) cavern - Survex 1.2.34 initialization file: /etc/therion.ini reading ... done This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts csr10 csti10 csbx10 csss10 csssi10 ... NOT INSTALLED This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts cmcyr10 cmcti10 cmcbx10 cmcss10 cmcssi10 ... NOT INSTALLED configuration file: thconfig reading ... therion: error -- BigCavernRanch.th [9] -- unknown configuration command -- survey ===============
The thconfig and .th files I used are embedded below as text.
Where should I put the "equate" command that will link the two caves?
Thanks!
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
I thought you used survey as command in thconfig file. There is a misunderstanding of each other. Between survey - endsurvey command could be many informations. Without the data I'm not able to recognize where is a problem. Martin S. Odesláno z iPhonu 30. 4. 2018 v 20:26, Bill Gee via Therion <therion@speleo.sk>:
Hi Martin -
I thought I *HAD* created a higher level of survey. That is what the BigCavernsRanch.th file does ... It imports surveys from the other projects by virtue of importing the .th files. The subsidiary .th files reference the centerline survey data through input statements.
Right??? Or am I completely missing something?
Maybe I should create a new file "AllMaps.th" which is nothing but an include of BigCavernsRanch.th??? Would that establish a new top-level survey?
(confused in Kansas...)
-- Bill Gee
On Monday, April 30, 2018 12:54:29 PM CDT Martin Sluka via Therion wrote: Bill, you should create higher level of survey, input all particular .th files and use it as source in thconfig. In that higher level survey you may eguate stations from different base level surveys.
Martin S.
Odesláno z iPhonu
26. 4. 2018 v 16:51, Bill Gee via Therion <therion@speleo.sk>:
Hello everyone -
I have been working on a multi-cave project for a while. Each cave exists as its own separate set of files. A few months ago - with help from this group - I figured out how to get a single output file that contains all four cave maps.
The combined map is generated from a single thconfig file that uses "source" commands to bring in the .th files from each of the member caves.
Now we have surveyed a link between two of the four caves. I need to set up an "equate" command so that the two caves actually link up. According to Aven, the gap is about 30 feet. Some of that, I am sure, is due to rounding errors in the GPS locates for the two caves.
Based on a message from Martin, I added a .th file which contains a "survey" command. However, that is generating an error from Therion:
========== therion 5.4.1 (2017-04-18) cavern - Survex 1.2.34 initialization file: /etc/therion.ini reading ... done This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts csr10 csti10 csbx10 csss10 csssi10 ... NOT INSTALLED This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts cmcyr10 cmcti10 cmcbx10 cmcss10 cmcssi10 ... NOT INSTALLED configuration file: thconfig reading ... therion: error -- BigCavernRanch.th [9] -- unknown configuration command -- survey ===============
The thconfig and .th files I used are embedded below as text.
Where should I put the "equate" command that will link the two caves?
Thanks!
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
Hi Martin - I fear you are right ... We are not communicating somehow. Let's try this ... I made a ZIP file containing the thconfig, *.th, *.,th2 and *.txt (centerline data) files from all four projects plus the project that brings them together. This file is called SampleData.zip and is copied to my public Dropbox location. It's a bit large to be emailing to the group. You should not need a Dropbox account to access the files in this folder. The link to my public Dropbox folder is https://www.dropbox.com/sh/8i520bdo8kr13w6/AAAIQOSi_WcKSpWxiibrAqDva?dl=0 That folder also contains the various PDF maps from the projects. At your convenience I would very much appreciate if you could take a quick look. -- Bill Gee On Monday, April 30, 2018 1:39:41 PM CDT Martin Sluka via Therion wrote:
I thought you used survey as command in thconfig file.
There is a misunderstanding of each other.
Between survey - endsurvey command could be many informations.
Without the data I'm not able to recognize where is a problem.
Martin S.
Odesláno z iPhonu
30. 4. 2018 v 20:26, Bill Gee via Therion <therion@speleo.sk>:
Hi Martin -
I thought I *HAD* created a higher level of survey. That is what the BigCavernsRanch.th file does ... It imports surveys from the other projects by virtue of importing the .th files. The subsidiary .th files reference the centerline survey data through input statements.
Right??? Or am I completely missing something?
Maybe I should create a new file "AllMaps.th" which is nothing but an include of BigCavernsRanch.th??? Would that establish a new top-level survey?
(confused in Kansas...)
On Monday, April 30, 2018 12:54:29 PM CDT Martin Sluka via Therion wrote: Bill, you should create higher level of survey, input all particular .th files and use it as source in thconfig. In that higher level survey you may eguate stations from different base level surveys.
Martin S.
Odesláno z iPhonu
26. 4. 2018 v 16:51, Bill Gee via Therion <therion@speleo.sk>:
Hello everyone -
I have been working on a multi-cave project for a while. Each cave exists as its own separate set of files. A few months ago - with help from this group - I figured out how to get a single output file that contains all four cave maps.
The combined map is generated from a single thconfig file that uses "source" commands to bring in the .th files from each of the member caves.
Now we have surveyed a link between two of the four caves. I need to set up an "equate" command so that the two caves actually link up. According to Aven, the gap is about 30 feet. Some of that, I am sure, is due to rounding errors in the GPS locates for the two caves.
Based on a message from Martin, I added a .th file which contains a "survey" command. However, that is generating an error from Therion:
========== therion 5.4.1 (2017-04-18) cavern - Survex 1.2.34 initialization file: /etc/therion.ini reading ... done This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts csr10 csti10 csbx10 csss10 csssi10 ... NOT INSTALLED This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts cmcyr10 cmcti10 cmcbx10 cmcss10 cmcssi10 ... NOT INSTALLED configuration file: thconfig reading ... therion: error -- BigCavernRanch.th [9] -- unknown configuration command -- survey ===============
The thconfig and .th files I used are embedded below as text.
Where should I put the "equate" command that will link the two caves?
Thanks!
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
I'm not on computer now. After tomorrow. M. Odesláno z iPhonu 30. 4. 2018 v 21:08, Bill Gee via Therion <therion@speleo.sk>:
Hi Martin -
I fear you are right ... We are not communicating somehow. Let's try this ...
I made a ZIP file containing the thconfig, *.th, *.,th2 and *.txt (centerline data) files from all four projects plus the project that brings them together. This file is called SampleData.zip and is copied to my public Dropbox location. It's a bit large to be emailing to the group. You should not need a Dropbox account to access the files in this folder.
The link to my public Dropbox folder is
https://www.dropbox.com/sh/8i520bdo8kr13w6/AAAIQOSi_WcKSpWxiibrAqDva?dl=0
That folder also contains the various PDF maps from the projects. At your convenience I would very much appreciate if you could take a quick look.
-- Bill Gee
On Monday, April 30, 2018 1:39:41 PM CDT Martin Sluka via Therion wrote: I thought you used survey as command in thconfig file.
There is a misunderstanding of each other.
Between survey - endsurvey command could be many informations.
Without the data I'm not able to recognize where is a problem.
Martin S.
Odesláno z iPhonu
30. 4. 2018 v 20:26, Bill Gee via Therion <therion@speleo.sk>:
Hi Martin -
I thought I *HAD* created a higher level of survey. That is what the BigCavernsRanch.th file does ... It imports surveys from the other projects by virtue of importing the .th files. The subsidiary .th files reference the centerline survey data through input statements.
Right??? Or am I completely missing something?
Maybe I should create a new file "AllMaps.th" which is nothing but an include of BigCavernsRanch.th??? Would that establish a new top-level survey?
(confused in Kansas...)
On Monday, April 30, 2018 12:54:29 PM CDT Martin Sluka via Therion wrote: Bill, you should create higher level of survey, input all particular .th files and use it as source in thconfig. In that higher level survey you may eguate stations from different base level surveys.
Martin S.
Odesláno z iPhonu
26. 4. 2018 v 16:51, Bill Gee via Therion <therion@speleo.sk>:
Hello everyone -
I have been working on a multi-cave project for a while. Each cave exists as its own separate set of files. A few months ago - with help from this group - I figured out how to get a single output file that contains all four cave maps.
The combined map is generated from a single thconfig file that uses "source" commands to bring in the .th files from each of the member caves.
Now we have surveyed a link between two of the four caves. I need to set up an "equate" command so that the two caves actually link up. According to Aven, the gap is about 30 feet. Some of that, I am sure, is due to rounding errors in the GPS locates for the two caves.
Based on a message from Martin, I added a .th file which contains a "survey" command. However, that is generating an error from Therion:
========== therion 5.4.1 (2017-04-18) cavern - Survex 1.2.34 initialization file: /etc/therion.ini reading ... done This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts csr10 csti10 csbx10 csss10 csssi10 ... NOT INSTALLED This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016) (preloaded format=pdfetex) restricted \write18 enabled. entering extended mode (./fonttest.tex checking optional fonts cmcyr10 cmcti10 cmcbx10 cmcss10 cmcssi10 ... NOT INSTALLED configuration file: thconfig reading ... therion: error -- BigCavernRanch.th [9] -- unknown configuration command -- survey ===============
The thconfig and .th files I used are embedded below as text.
Where should I put the "equate" command that will link the two caves?
Thanks!
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
On 2018-04-26 09:51 -0500, Bill Gee via Therion wrote:
The combined map is generated from a single thconfig file that uses "source" commands to bring in the .th files from each of the member caves.
Now we have surveyed a link between two of the four caves. I need to set up an "equate" command so that the two caves actually link up.
Based on a message from Martin, I added a .th file which contains a "survey" command. However, that is generating an error from Therion:
...
========== BigCavernRanch.th =========== # Bring in subsidiary files
# Name the input caves source ../AllieSpringCaveSurvey/AllieSpringCave.th source ../MillCreekCaveSurvey/MillCreekCave.th source ../ShiftyRockPit/ShiftyRockPit.th source ../CascadeCaverns/CascadeCaverns.th
survey all equate AA42@ShiftyRockPit DR23@AllieSpringCave endsurvey
'source' is a command that goes in a thconfig file. 'survey' is a command that goes in a .th file. thconfig and .th files have different formats. So even though you've called the file 'BigCavernRanch.th', it's being treated as a thconfig file. I think if you change: input BigCavernRanch.th to source BigCavernRanch.th that should do the trick. input is 'insert file as if it was written here' source is 'read this .th data file here' Wookey -- Principal hats: Linaro, Debian, Wookware, ARM http://wookware.org/
Hi Wookey - Voila! That was the secret incantation. This .th file compiles without error. I used "source BigCavernRanch.th" in the thconfig file. ====== BigCavernRanch.th =========== # Bring in subsidiary files survey all # Name the input caves input ../AllieSpringCaveSurvey/AllieSpringCave.th input ../MillCreekCaveSurvey/MillCreekCave.th input ../ShiftyRockPit/ShiftyRockPit.th input ../CascadeCaverns/CascadeCaverns.th equate AA42@ShiftyRockPit DR23@AllieSpringCave endsurvey ============================== Many thanks! -- Bill Gee On Monday, April 30, 2018 3:48:29 PM CDT Wookey via Therion wrote:
On 2018-04-26 09:51 -0500, Bill Gee via Therion wrote:
The combined map is generated from a single thconfig file that uses "source" commands to bring in the .th files from each of the member caves.
Now we have surveyed a link between two of the four caves. I need to set up an "equate" command so that the two caves actually link up.
Based on a message from Martin, I added a .th file which contains a "survey" command. However, that is generating an error from Therion: ...
========== BigCavernRanch.th =========== # Bring in subsidiary files
# Name the input caves source ../AllieSpringCaveSurvey/AllieSpringCave.th source ../MillCreekCaveSurvey/MillCreekCave.th source ../ShiftyRockPit/ShiftyRockPit.th source ../CascadeCaverns/CascadeCaverns.th
survey all
equate AA42@ShiftyRockPit DR23@AllieSpringCave
endsurvey
'source' is a command that goes in a thconfig file. 'survey' is a command that goes in a .th file.
thconfig and .th files have different formats. So even though you've called the file 'BigCavernRanch.th', it's being treated as a thconfig file.
I think if you change: input BigCavernRanch.th to source BigCavernRanch.th that should do the trick.
input is 'insert file as if it was written here' source is 'read this .th data file here'
Wookey
participants (3)
-
Bill Gee -
Martin Sluka -
Wookey