[therion-users] simple HOWTO
Sorry - I deleted the original message, but you wrote:
Until some manual to xtherion will come, you can do following simple steps:
1. Go to map editor 2. File->New 3. Press Insert button in Background images control panel 4. Open some *.gif (limitation of tcl/tk) file 5. Press "Auto adjust" button in Drawing area control panel 6. Open File commands control panel 7. Select "Action" -> Insert scrap 8. Press created "Insert scrap" button 9. click on "scrap1" in file commands list box 10. set "projection" to none in scrap control panel 11. press Control+L (or Edit -> Insert line) 12. draw close line (couter-clockwise oriented ;-) by clicking the last point on the first point 13. save the file as test.th2
Now an export of this simple map should work, if you will type folloving thconfig file
source test.th2 export map none
If this will work, then the lesson 2 will come. But probably you'll understand a lot of things from this simple example...
That was very helpful. I do now basically understand how it works, except for how to set the scale for a scrap (and exactly what that means), and how to relate the picture to the real stations. I'm in a hurry so here are some hasty notes. I hope it is enough to help me along a bit further. However it didn't quite work: compile failed with test.th2[26] - invalid command context, because the line was outside the scrap context. (all the lines are above the 'scrap' entry). Even if you move this line to top so line is enclosed by scrap you still get same error. Adding a survey enclosure gets us 'no selected projection data' I also put in a proper survey to relate to some real data: But that wouldn't produce output either: If you use same name in station label as station in .th file e.g. '5' point x y station -station 5 then survey data specifying station 5 gvies an erro 'object exists -- 5' Change one (e.g. to '05') and data compiles but then says 'projection extended - no reference station' - how is this made to work? So I am stuck again and still haven't quite managed to produce any ouput. I need another clue. 'lesson 2' :-) Do I need to post sample files? I also found a lot of other things that were problems for the new user. You probably know about these but I'll record them here anyway as a useful feedback: * Errors in compiler go off screen RH side - wrap them? * Lots of stuff cannot be read in RH side panels (eg point types) - widen box, shrink font, make pop-up show current text not truncate it to fit (I shrank the font from 12 to 9 pt in the xtherion tcl script and that was a lot better on a 1024x768 screen). Once you know all the options it doesn't matter so much but to start with it is hopeless - you can only see the first 7-8 characters or so. * More keyboard shortcuts - may exist already? * If you add a scrap manually then set the projection in xtherion and save it doesn't add it. You need to delete scrap and redo in xtherion. * projection command/object doesn't seem to be recognised - you need the -projection option for the scrap command instead. * How do I set the scale for a scrap? what does 'update scale' do? * F1 etc don't work if menu currently selected. (tcl limitation? - quite annoying) * Problem with files being updated in two places at once. eg edit thconfig in text editor but version in compiler is not changed. If you close one in compiler to force an update it overwrites the version on disk. Needs to check modification times or something slightly smarter. Similar prob with edits made in text editor and in map editor at same time. Wookey -- Aleph One Ltd, Bottisham, CAMBRIDGE, CB5 9BA, UK Tel +44 (0) 1223 811679 work: http://www.aleph1.co.uk/ play: http://www.chaos.org.uk/~wookey/
I'm in a hurry so here are some hasty notes. I hope it is enough to help me along a bit further.
I'm also a bit hurry, so only the most necessary things. Martin call me today, that he has written down some short xtherion control manual, I'll put it on the web, when I'll get it.
However it didn't quite work: compile failed with test.th2[26] - invalid command context, because the line was outside the scrap context. (all the lines are above the 'scrap' entry). Even if you move this line to top so line is enclosed by scrap you still get same error.
Yes, I forgot, that scrap must be enclosed in survey -- endsurvey, and any scrap command in scrap -- endscrap.
Adding a survey enclosure gets us 'no selected projection data'
As you probably noticed, the problem is, that -projection switch is probably not correctly set to none. But it can be also a bug on our side...
I also put in a proper survey to relate to some real data: But that wouldn't produce output either: If you use same name in station label as station in .th file e.g. '5' point x y station -station 5 then survey data specifying station 5 gvies an erro 'object exists -- 5'
??? Please, send me the source file -- this does not make sense to me!
Change one (e.g. to '05') and data compiles but then says 'projection extended - no reference station' - how is this made to work?
So I am stuck again and still haven't quite managed to produce any ouput. I need another clue. 'lesson 2' :-)
I'll try to write more tomorrow.
Do I need to post sample files?
It would be probably better, they're not big.
I also found a lot of other things that were problems for the new user. You probably know about these but I'll record them here anyway as a useful feedback:
* Errors in compiler go off screen RH side - wrap them? * Lots of stuff cannot be read in RH side panels (eg point types) - widen box, shrink font, make pop-up show current text not truncate it to fit (I shrank the font from 12 to 9 pt in the xtherion tcl script and that was a lot better on a 1024x768 screen). Once you know all the options it doesn't matter so much but to start with it is hopeless - you can only see the first 7-8 characters or so.
I can play with it a little bit... I've problems reading small letters, therefore 12pt. I'll have to support some user-configuration file...
* More keyboard shortcuts - may exist already?
All shortcuts are listed in menus, so probably they do not exist. Please be more concrete (e.g. Control+Alt+S -> create new scrap).
* If you add a scrap manually then set the projection in xtherion and save it doesn't add it. You need to delete scrap and redo in xtherion.
I'll check that, may be a bug, but try changing the projection and pressing after the Return button. This may help... but I'll check anyway...
* projection command/object doesn't seem to be recognised - you need the -projection option for the scrap command instead.
It's not a command. Projection can be set only via -projection option. This is inconsistency in our data format -- too late to change.
* How do I set the scale for a scrap? what does 'update scale' do?
Tomorrow...
* F1 etc don't work if menu currently selected. (tcl limitation? - quite annoying)
We have same problems... Probably it has to be overcome via some key bindings and automatic focus changes...
* Problem with files being updated in two places at once. eg edit thconfig in text editor but version in compiler is not changed. If you close one in compiler to force an update it overwrites the version on disk. Needs to check modification times or something slightly smarter. Similar prob with edits made in text editor and in map editor at same time.
This should be also fixed (I had also this problem several times.) I've no more time today, but tomorrow, I'll write these things on TODO list and I'll try to write some lesson 2... S.
Today I've more time, so I'll add some comments:
That was very helpful. I do now basically understand how it works, except for how to set the scale for a scrap (and exactly what that means), and how to relate the picture to the real stations.
The scrap scale and projection are two fundamental things, that are not explained in README file. I'll try to shortly do it. Currently, therion supports four types of projections. PLAN and ELEVATION are standard ortogonal projections, EXTENDED is a standard extended elevation. If you want to use these, each scrap need to have specified at least one control station - "point x y station -station name" where name is the station name from data. The last projection is NONE, here no control stations may be specified. This is used to enter passage cross-sections or to draw maps, where no centerline data are avaiable (digitization of old maps). Scrap scale is used to pre-scale (convert coordinate from pixels to meters) the scrap data. If scrap projection is none, this is the only transformation that is done with coordinates. In xtherion, the scale can be defined only one way - using coordinates of two points. When you will select a scrap - two small red squares will appear (by defalut, they'll be in the corners of drawing area). You have to drag them to points, coordinates of which you know - usually the cross sections of mm grid lines on the scanned drawing. If you can not see scrap these points, you can move pointer to desired position, red pointer coordinates from status bar and enter these coordinates into boxes picture scale points. You have to fill X1,Y1 and X2,Y2 coordinate pairs. Then you have to enter real coordinates of these points. Using these two points is defined a linear transformation, that will be applied to scrap before any fitting to survey points. Uff, it's written very complicated, but it's really very simple. You just have to enter two coordinates of two points in the picture (pixel) coordinates and real (meters) coordinates. Do not forget pressing Return afterwards.
I also put in a proper survey to relate to some real data: But that wouldn't produce output either: If you use same name in station label as station in .th file e.g. '5' point x y station -station 5 then survey data specifying station 5 gvies an erro 'object exists -- 5' Change one (e.g. to '05') and data compiles but then says 'projection extended - no reference station' - how is this made to work?
This should not happen. I've tested following code s.th: survey s data data cartesian from to dx dy dz 0 1 10 10 10 enddata scrap ss point 0 0 station -station 0 point 1 1 station -station 1 endscrap map mm ss endmap endsurvey with simple thconfig: source s.th export map and it worked on my therion (OK, thpdf had some protests, because wall was missing - I've to fix this, but it worked). You can see, that at my Lesson 1 I've made one more mistake - I forget to place a scrap into map - this is necessarry. Because therion export only maps, not scraps. So if you will run therion with this simple example. So your "Adding a survey enclosure gets us 'no selected projection data'" was due to missing map command with scrap name in the body. Maps are used to organize scraps - order and so on.
* Errors in compiler go off screen RH side - wrap them?
This is questionable - firstly they were wrapped - but then I realized, that it's better to scroll them.
* Lots of stuff cannot be read in RH side panels (eg point types) - widen box, shrink font, make pop-up show current text not truncate it to fit (I shrank the font from 12 to 9 pt in the xtherion tcl script and that was a lot better on a 1024x768 screen). Once you know all the options it doesn't matter so much but to start with it is hopeless - you can only see the first 7-8 characters or so.
On the border between working area and panel on the bottom (10% of height) is a small panel resize button ;-) You can enlarge panel to fit your needs ;-)))
* If you add a scrap manually then set the projection in xtherion and save it doesn't add it. You need to delete scrap and redo in xtherion. * How do I set the scale for a scrap? what does 'update scale' do?
The scale settings are commented above. Here I would comment the update buttons. The update botton will evaluate "update" script, that will apply changes, that were typed manually. Normally, this update script is evaluated very often (every time you click, you compile or you save file). But sometimes, if you want to apply changes, you need to press this button. Normally, every text field, where you enter data, have a Return key binding, that will force update. So when you will manually write down the projection, you need to press "Update scrap" button, or press Return. In fact I had no time to think about sophisticated undo redo process, so undo - redo action is created when an update script is run.
* F1 etc don't work if menu currently selected. (tcl limitation? - quite annoying)
What menu have you in mind? Sometimes it also does not work on my computer, but I've never find the reason.
* Problem with files being updated in two places at once. eg edit thconfig in text editor but version in compiler is not changed. If you close one in compiler to force an update it overwrites the version on disk. Needs to check modification times or something slightly smarter. Similar prob with edits made in text editor and in map editor at same time.
This have to be fixed. Thanx for comments, some of them would be really usefull to apply. S.
On Wed 04 Dec, Stacho Mudrak wrote:
I also put in a proper survey to relate to some real data: But that wouldn't produce output either: If you use same name in station label as station in .th file e.g. '5' point x y station -station 5
OK - I found the problem with this. I added points with Xtherion and the entry in the file was: point x y station -name 5 and that doesn't work. Maybe I pushed the wrong buttons - but certainly this could catch out other new users - it looks convincing, only a conmparison with an example file (below) showed me the problem.
then survey data specifying station 5 gvies an erro 'object exists -- 5' Change one (e.g. to '05') and data compiles but then says 'projection extended - no reference station' - how is this made to work?
This should not happen. I've tested following code s.th:
survey s data data cartesian from to dx dy dz 0 1 10 10 10 enddata
scrap ss point 0 0 station -station 0 point 1 1 station -station 1 endscrap
map mm ss endmap
endsurvey
with simple thconfig:
source s.th export map
and it worked on my therion (OK, thpdf had some protests, because wall was missing - I've to fix this, but it worked).
OK. This worked - hooray, I finally produced a map! So then I went to fix my 'real' cave example. Fixing the above station problem was the first thing, then I realised that I couldn't have a scrap name the same as a survey name. (I called the scrap 'doline' as well as the survey 'doline' - that didn't work) And finally I had to give scrap@survey syntax to get it recognised. I've added a few notes on this to ch04.tex (not sure if tha'ts really the right place but I thought it a good idea to have a remonder of these things). So now it processes as far as trying to produce a PDF but it just gets stuck on 98% CPU (I left it for 5 hours and this is a one-survey, one-scrap map, but it never completed). Attached are the relevant files (but not the images)- does it work for you? Maybe this is fixed by the new download - I have downloaded it but these tests were at the weekend. Wookey -- Aleph One Ltd, Bottisham, CAMBRIDGE, CB5 9BA, UK Tel +44 (0) 1223 811679 work: http://www.aleph1.co.uk/ play: http://www.chaos.org.uk/~wookey/ encoding utf-8 source dxd.th #source test.th2 export model -fmt survex export map extended -o dxd_extelv.pdf #export map plan -o dxd_plan.pdf #export atlas plan -o dxd_atlas.pdf encoding iso8859-1 survey doline -title "Doline" #survey from entrance out of doline to GPSable point input doline.th2 data date 2001.06.19 team "Wookey" notes pictures team "Conor McGrath" compass clino team "Brian Judd" tape team "Oz Williams" tape units clino compass degrees units tape metres #grade BCRA4 data normal from to length compass clino #*export 1,40 1 2 27.84 098 +12 2 3 15.95 072 -03 3 4 27.91 092 -02 4 5 27.96 153 +08 3 3b 55 348 -05 #comp 148 in original survey - checked on groud, and found to be 348 5 6 9.68 204 +27 6 7 12.80 200 +03 7 8 27.15 104 +14 8 9 15.23 106 +10 9 10 21.14 158 +12 flags surface 10 11 10.39 090 +15 11 12 6.74 326 +04 12 13 5.57 330 +41 13 14 11.62 058 +41 14 15 8.39 088 +40 15 16 2.70 004 +42 16 17 8.50 357 +22 17 18 9.28 066 +37 18 19 7.13 129 +21 19 20 5.84 102 +11 20 21 5.90 017 +40 21 22 4.98 336 +43 22 23 6.55 005 +39 23 24 29.95 015 +38 24 25 12.40 062 +25 25 26 12.80 103 +24 26 27 6.93 070 +19 27 28 8.22 145 -11 28 29 10.90 065 +03 29 30 8.70 140 +08 30 31 5.90 119 +06 31 32 7.70 083 +05 32 33 14.87 128 +13 33 34 5.04 066 +22 34 35 6.90 114 +23 35 36 9.65 004 +34 36 37 7.75 110 +37 37 38 7.90 086 +27 38 39 11.10 040 +15 39 40 1.70 - down enddata endsurvey encoding utf-8 ##XTHERION## xth_me_area_adjust -128 -554 1768 1328 ##XTHERION## xth_me_area_zoom_to 100 ##XTHERION## xth_me_image_insert {0 1} 1200 img/1.gif 0 {} scrap dolines -projection extended -scale [-128 -554 1768 -554 0.0 0.0 48.1584 0.0 m] point 596.0 541.0 station -station 38 point 788.0 -227.0 station -station 12 point 821.0 -234.0 station -station 11 point 938.0 -254.0 station -station 10 point 1088.0 -285.0 station -station 9 point 1211.0 -309.0 station -station 8 point 1378.0 -357.0 station -station 7 point 1387.0 -357.0 station -station 6 point 1433.0 -385.0 station -station 5 line contour 1565.0 929.0 1565.0 848.0 1565.0 833.0 1568.0 762.0 1568.0 696.0 1564.0 640.0 1560.0 559.0 1560.0 535.0 1557.0 464.0 1567.0 400.0 1571.0 387.0 1580.0 387.0 1613.0 369.0 1624.0 367.0 1637.0 360.0 endline line arrow endline line rock-edge 1618.0 -399.0 1622.0 -418.0 endline line rock-edge 1571.0 -376.0 1578.0 -409.0 endline line rock-edge -close on 1611.0 -417.0 1612.0 -401.0 1618.0 -399.0 1626.0 -399.0 1628.0 -413.0 1622.0 -418.0 1611.0 -417.0 endline line rock-border -close on 1565.0 -406.0 1571.0 -376.0 1579.0 -382.0 1584.0 -411.0 1565.0 -406.0 endline line rock-border 1520.0 -402.0 1513.0 -398.0 1517.0 -390.0 1504.0 -385.0 1517.0 -390.0 endline line rock-edge -close on 1498.0 -400.0 1504.0 -385.0 1511.0 -380.0 1529.0 -387.0 1520.0 -402.0 1513.0 -398.0 1498.0 -400.0 endline line rock-border 513.0 -90.0 528.0 -96.0 535.0 -103.0 537.0 -132.0 538.0 -139.0 545.0 -143.0 629.0 -165.0 660.0 -174.0 685.0 -180.0 694.0 -184.0 704.0 -191.0 710.0 -210.0 734.0 -218.0 748.0 -223.0 760.0 -224.0 782.0 -228.0 809.0 -235.0 827.0 -237.0 842.0 -237.0 873.0 -247.0 909.0 -255.0 939.0 -261.0 964.0 -268.0 990.0 -267.0 1032.0 -279.0 1069.0 -289.0 1087.0 -292.0 1106.0 -292.0 1127.0 -301.0 1168.0 -308.0 1202.0 -315.0 1211.0 -309.0 1271.0 -326.0 1287.0 -332.0 1306.0 -342.0 1334.0 -353.0 1353.0 -360.0 1364.0 -360.0 1378.0 -357.0 endline line rock-edge 1448.0 -385.0 1465.0 -381.0 1476.0 -375.0 1491.0 -365.0 1504.0 -357.0 1518.0 -347.0 1544.0 -330.0 1555.0 -328.0 1604.0 -307.0 1616.0 -303.0 1640.0 -295.0 1640.0 -295.0 1640.0 -295.0 1640.0 -295.0 1640.0 -295.0 1640.0 -295.0 1640.0 -295.0 1640.0 -295.0 1640.0 -295.0 1640.0 -295.0 1544.0 -330.0 1481.0 -368.0 endline line rock-edge 1584.0 -411.0 1601.0 -408.0 1611.0 -417.0 endline line rock-edge 1525.0 -397.0 1536.0 -402.0 1552.0 -399.0 1558.0 -407.0 endline line rock-edge 1378.0 -357.0 1387.0 -357.0 1387.0 -363.0 1398.0 -359.0 1399.0 -366.0 1405.0 -363.0 1406.0 -370.0 1416.0 -367.0 1417.0 -379.0 1427.0 -376.0 1433.0 -385.0 1448.0 -385.0 1459.0 -392.0 1469.0 -390.0 1478.0 -391.0 1485.0 -394.0 1492.0 -395.0 endline line contour 587.0 544.0 601.0 534.0 612.0 518.0 626.0 516.0 637.0 494.0 662.0 484.0 682.0 481.0 718.0 473.0 747.0 465.0 777.0 457.0 808.0 450.0 834.0 446.0 857.0 434.0 895.0 406.0 914.0 396.0 928.0 388.0 944.0 384.0 960.0 385.0 1040.0 386.0 1052.0 382.0 1068.0 380.0 1100.0 371.0 1133.0 359.0 1163.0 344.0 1194.0 312.0 1208.0 294.0 1209.0 286.0 1205.0 276.0 1180.0 250.0 1130.0 196.0 1130.0 196.0 1103.54 170.02 1075.0 142.0 1046.46 113.98 1036.0 107.0 1036.0 107.0 smooth off 1036.0 99.0 1036.0 99.0 1042.0 86.0 1042.0 81.0 1042.0 63.0 1017.0 43.0 1017.0 43.0 smooth off 976.0 4.0 968.0 -6.0 970.0 -16.0 980.0 -30.0 980.0 -38.0 969.0 -54.0 943.0 -86.0 943.0 -86.0 smooth off 916.0 -125.0 882.0 -166.0 835.0 -208.0 821.0 -227.0 821.0 -234.0 endline line contour 215.0 589.0 251.0 579.0 294.0 573.0 327.0 568.0 370.0 561.0 408.0 556.0 448.0 551.0 486.0 545.0 541.0 542.0 587.0 544.0 618.0 548.0 664.0 549.0 711.0 557.0 758.0 570.0 801.0 584.0 876.0 611.0 978.0 657.0 1079.0 702.0 1180.0 747.0 1273.0 784.0 1338.0 804.0 1418.0 831.0 1456.0 842.0 1532.0 864.0 1606.0 887.0 1640.0 901.0 endline endscrap encoding iso8859-1 survey ants #Cave: Da Xiao Dong #Yangtze Gorges, Jiang Kou area # input ants.th2 data #Ants on the path streamway, follows on from sanctuary. date 2001.06.27 team "Wookey" notes pictures team "Chris Densham" compass clino title "Ants on the Path" grade BCRA5 data normal from to tape compass clino #*export 1,12 2 1 19.53 190 +32 3 2 9.57 154.5 +13 4 3 1.98 142 +09 5 4 9.13 121 +24.5 5 6 2.53 235 -24 6 7 7.57 295 -17 8 7 17.30 110 +60.5 8 9 7.09 316 -12 9 10 7.91 260 -75 10 11 8.61 170 -76 11 12 8.82 280 -76 #aprox legs to show depth and canyon #superceded by next survey #12 13 40 - down #13 14 030 20 0 #14 15 20 - down #15 16 200 030 -03 #descriptions #1 0.8 6 7.5 1.8 #2 0 (2) 0.8 5 1.8 RP #3 1.2 1 >5 1.8 #4 3 1.8(0.8) >6 1.5 RP #5 2 0(1) 3.5 1.6 #6 1.5 0(3) >7 1.7 #7 1.3(~4) 0 >8 1.4 RP #8 1 7 - 4 RP '8' on LHW #9 10 2 - - Knot of pitch #10 120:4 ~2 210:13 030:3/5 1st rebelay bolt #11 120:2 4 210:11 030:1 2nd rebelay bolt enddata endsurvey encoding iso8859-1 survey ants2 -title "Ants rift" #Cave: Da Xioa Dong #Yangtze Gorges, Jiang Kou area #Down rest of pitch and along the bottom # input ants2.th2 data date 2001.06.28 team "Brian Judd" notes pictures team "Lev Bishop" compass clino tape units clino compass degrees units tape metres grade BCRA5 data normal from to tape compass clino #*export 1 ; starts at 2nd rebelay bolt; 15 on previous survey 1 2 46.17 - down 2 3 3.34 004 +08 3 4 4.90 - down 4 5 16.27 - down 5 6 2.66 046 +15 6 7 8.67 019 -04 7 8 7.35 039 +06 8 9 14.30 - down #+90 in notes - but that's not right 9 10 27.35 040 0 10 11 9.26 039 -12 11 12 16.10 025 +04 12 13 31.00 030 0 13 14 11.25 045 -02 14 15 13.80 032 +12 15 16 11.93 055 -06 16 17 7.10 080 -27 17 18 14.95 023 -11 18 19 12.70 023 -05 #1 2 3 040:15 220:5 #2 1.5 0 P P #3 0.5 3.5 P P #4 0.5 3.5 P P #5 0.5 3.5 P5 P10 #6 0.5 3.5 15 10 #7 0.75 0 15 8 #8 0.75 0.75 23 0 top of 14m pitch #9 0 2.5 10 4 #10 1.3 0 10 1.7 #11 0 1.3 15 2 #12 3.5 3 10 1.7 #13 1 0 5 3 #14 0 1 5 8 start of traverse #15 5 8 2 2 #16 0 5 3 1 #17 2.5 0 8 2.5 Bolt RHW, top of p2 #19 Maelstrom of water - big inlet - THE END enddata endsurvey encoding iso8859-1 survey daxiaodong input doline.th input entrance.th input overflow.th input sanctuary.th input ants.th input ants2.th data # UTM WGS84 48R 0788984 3236595 fix GPS 88984 36595 1175 40@doline GPS 6.00 090 +05 #approximate leg equate 1@doline 1@entrance equate 25@entrance 1@overflow equate 20@overflow 1@sanctuary equate 25@sanctuary 1@ants equate 12@ants 1@ants2 enddata # join cesta_ddd.s@dur.dur_dom hipds@hip.hip_dom -smooth off # revise hipds@hip.hip_dom -stations 19@dur.dur_dom # revise dd.s@dur.dur_dom -stations [4@monum.dur_dom 5@monum.dur_dom 6@monum.dur_dom] map dxd -title "Da Xiao Dong - Extended Elevation" dolines@doline endmap # map komnata_13.m -title "Trinásta komnata" # 13k.s@13kom.dur_dom # break # plaz.s@za13.dur_dom # preview above duranov_dom.m # preview above ch_monum.m # preview below hip_dom.m # endmap endsurvey encoding iso8859-1 survey entrance -title "Entrance" # input entrance.th2 data team "Wookey" notes pictures team "Conor McGrath" notes pictures tape team "Oz Williams" compass clino team "Brian Judd" tape date 2001.06.18 units clino compass degrees data normal from to tape compass clino 1 1a 29.72 169 +03 1a 1b 29.44 165 +02 1 1c 24.49 321 -18 1 2 29.69 263 -10 2 3 29.92 265 -06 3 4 29.63 275 -05 4 5 31.03 248 -04 5 6 9.50 226 -27 6 7 14.02 258 -09 7 8 3.2 225 -11 8 9 4.45 328 -23 9 10 5.04 246 -26 10 11 6.90 308 -15 11 12 7.42 010 -49 12 13 9.80 322 +01 14 13 7.48 148 +40 14 15 7.66 299 -01 15 16 7.71 281 +04 16 17 6.90 042 -06 17 18 7.58 346 +02 17 19 8.00 348 -18 20 19 6.00 213 +46 20 21 3.95 030 -20 22 21 7.78 157 +33 23 22 9.50 110 +03 24 23 6.23 053 +03 25 24 8.60 186 +09 enddata endsurvey encoding iso8859-1 survey overflow -title "The Overflow" # input overflow.th2 data date 2001.06.24 team "Wookey" notes pictures team "Chris Densham" compass clino units clino compass degrees units tape metres grade BCRA5 data normal from to tape compass clino #*export 1,20 1 2 2.45 286 -30.5 2 3 3.90 - DOWN 4 3 6.20 094 -21 5 4 7.46 180 +13 5 6 5.40 273 +07 6 7 5.52 352.5 -10 8 7 11.97 101 +18.5 8 9 4.96 339.5 -10 10 9 8.67 100 +18.5 11 10 10.18 094 +48 12 11 21.25 117 +46 #notes had leg reversed 13 12 9.10 097.5 00 13 14 11.40 288 -12 14 15 19.58 298.5 00 16 15 4.99 162 +24 17 16 7.65 107 +08 17 18 9.43 315 -38.5 18 19 8.75 259.5 +01 19 20 5.93 230 -18.5 #RP=Red point (nail varnish) station 1 "'.25' on RHW" station 2 "RP 0.5 below bolt LHW" station 3 "RP bottom of plumb" station 4 "RP" station 5 "chris' eyeball" station 6 "RP LHW" station 7 "RP '1' RHW at pitch" station 8 "RP LHW" station 9 "RP RHW" station 11 "RP" station 12 "RP LHW" station 13 "chris's eyeball" station 14 "RP RHW" station 15 "RP high on LHW" station 16 "RP" station 17 "RP" station 18 "RP" station 19 "RP" station 20 "RO '20'" enddata endsurvey encoding iso8859-1 survey sanctuary -title "Sanctuary" #Cave: Da Xioa Dong, follows on from 'overflow' survey #Yangtze Gorges, Jiang Kou area #This survey had a number of errors, which we beleive have been corrected by #analysis after the fact. #There was a station missing at the bottom of all the plumbs # so 10b, 16a and 24 are made up. Also in 18-16, 16 is referred to as 19. # Took us bloody ages to work that out! # input sanctuary.th2 data date 2001.06.25 team "Brian Judd" notes pictures team "Lev Bishop" compass clino units clino compass degrees units tape metres grade BCRA5 data normal from to tape compass clino #*export 1,25 2 1 7.69 168 -01 2 3 13.00 308 -47 3 4 12.15 328 -02 4 5 11.56 289 -02 6 5 6.35 194 -09 7 6 2.20 145 +12 #read backsight?-325 in notes 8 7 18.50 160 +12 9 8 8.30 200 -09 #maybe 3.30? 10 9 10.70 137 +13 10b 10 6.3 190 +80 11 12 28.55 001 +11 12 10b 8.70 310 +01 10b 13 19.35 289 +08 13 14 9.25 330 -40 14 15 7.30 046 -11 15 16a 3.60 090 -50 #16a mising in notes 16a 16 8.95 340 -60 16 17 12.10 160 +21 18 16 9.97 179 -13 #19 in notes - must be 16 really 18 20 3.28 108 -20 20 21 19.70 - down 21 22 23.65 034.5 +14 22 23 3.20 295 -10 23 24 13.04 - down 24 25 5.43 013 +16 enddata endsurvey
Attached are the relevant files (but not the images)- does it work for you?
Maybe this is fixed by the new download - I have downloaded it but these tests were at the weekend.
Yes, new download should help you (in the old version, there was one infinite loop...). At least, on my computer, I had no problems with compilation. S.
participants (2)
-
Stacho Mudrak -
Wookey