I had put one cave using a cs and gps fix coordinates into one survey block in a .th file. Then a second cave using a different cs and gps fix coordinates in a second .th file.
My project then uses a master.th file which inputs both of these. If I run my config on either of the individual files then they appear at the correct place on Google Earth from an output kml file. If I include both caves then they appear in different places. The one I include first is in the correct place. If I swap the order they appear in the master.th file then this confirms the first one is alway put in the correct place, and the second is positioned using the cs of the first one.
The same in a lox model file (except I cannot confirm which is correct, but I see them in different places when I give them the same entrance location to test this).
Footleg
You can use cs in config file, either inside layout, or outside layout (most likely what you want to do) to control the output co-ordinate system, which I think is what you are trying to do?
Andrew
On 19 Sep 2014 14:00, "Footleg" <drfootleg@gmail.com> wrote:I have been converting a project from an old datum to a more recent
one following the issuing of new maps using the newer datum. So all my
entrance GPS coordinates changed. I updated the cs statements in my
survey data files and my KML output is still in the correct place. So
all was looking good. Then I discovered that if I include a survey in
the old cs with one using the new cs then Therion appears to treat
both caves as having the same cs. Whichever cs is used by the first
included cave is applied to subsequent caves too. Is there a way to
deal with this?
Footleg
_______________________________________________
Therion mailing list
Therion@speleo.sk
http://mailman.speleo.sk/mailman/listinfo/therion
_______________________________________________
Therion mailing list
Therion@speleo.sk
http://mailman.speleo.sk/mailman/listinfo/therion