Hi Vasily,
Thanks, it's not the definitive solution but it's a good trick.
The problem is really related to fix command. When I comment the
"fix" and "cs" commands in my survey , the displacement is
not as big as before (357000000 units). Now the sketch is in
the upper xvi limit.
I have tested your trick in 4 extended
elevation sketch, and it's OK for 3, for the 4º I have only tu
displace -7m in Z dimension (fix station 0 0 -7).
The only minor problem with the trick is when you want put
together the 4 sketch. With the plan sketch I can move manually
the xvi to 0 0, and all the sketch are moved to the right place.
Now I have to move manually every sketch to superpose with the
original XVI without morphed sketch. But you only have to do this
one time, after the sketch and xvi associated are good placed the
next time you open the .th2 file.
Evaristo.
El 06/01/2018 a las 3:42, Vasily Vl. Suhachev via Therion
escribió:
Hello
I found some trick to fix XVI wrong placement problem
On a dedicated XVI thconfig use such commands
source
centerline
fix 62@stels1.stels
0 0 0
endcenterline
endsource
Station to fix is should be upper station in current elevation
XVI
Please test this workaround... I hope it is working
06.01.2018 02:03, Evaristo Quiroga
via Therion пишет:
It's
a program bug that wrong calculate the Y coordinate. To resolve
properly it has to be corrected by Therion programmers.
--
WBR, Vasily
_______________________________________________
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion